Update register address for i.MX6 SLL
Signed-off-by: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
---
arch/arm/include/asm/arch-mx6/imx-regs.h | 76 ++++++++++++++++++++------------
1 file changed, 49 insertions(+), 27 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h
b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 8bb36eb..53e499c 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -26,7 +26,7 @@
#define APBH_DMA_ARB_END_ADDR 0x0180BFFF
#define M4_BOOTROM_BASE_ADDR 0x007F8000
-#else
+#elif !defined(CONFIG_MX6SLL)
#define CAAM_ARB_BASE_ADDR 0x00100000
#define CAAM_ARB_END_ADDR 0x00103FFF
#define APBH_DMA_ARB_BASE_ADDR 0x00110000
@@ -46,13 +46,9 @@
#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
/* GPV - PL301 configuration ports */
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+ defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL))
#define GPV2_BASE_ADDR 0x00D00000
-#else
-#define GPV2_BASE_ADDR 0x00200000
-#endif
-
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define GPV3_BASE_ADDR 0x00E00000
#define GPV4_BASE_ADDR 0x00F00000
#define GPV5_BASE_ADDR 0x01000000
@@ -61,6 +57,7 @@
#define PCIE_ARB_END_ADDR 0x08FFFFFF
#else
+#define GPV2_BASE_ADDR 0x00200000
#define GPV3_BASE_ADDR 0x00300000
#define GPV4_BASE_ADDR 0x00800000
#define PCIE_ARB_BASE_ADDR 0x01000000
@@ -96,7 +93,7 @@
#define WEIM_ARB_END_ADDR 0x57FFFFFF
#define QSPI0_AMBA_BASE 0x60000000
#define QSPI0_AMBA_END 0x6FFFFFFF
-#else
+#elif !defined(CONFIG_MX6SLL)
#define SATA_ARB_BASE_ADDR 0x02200000
#define SATA_ARB_END_ADDR 0x02203FFF
#define OPENVG_ARB_BASE_ADDR 0x02204000
@@ -111,7 +108,8 @@
#define WEIM_ARB_END_ADDR 0x0FFFFFFF
#endif
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+ defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define MMDC0_ARB_BASE_ADDR 0x80000000
#define MMDC0_ARB_END_ADDR 0xFFFFFFFF
#define MMDC1_ARB_BASE_ADDR 0xC0000000
@@ -141,19 +139,21 @@
#define ECSPI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x0C000)
#define ECSPI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x10000)
#define ECSPI4_BASE_ADDR (ATZ1_BASE_ADDR + 0x14000)
-#ifdef CONFIG_MX6SL
-#define UART5_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
-#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000)
-#define UART2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
-#define SSI1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000)
-#define SSI2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
-#define SSI3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
-#define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
-#define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000)
-#else
+
+#define MX6SL_UART5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SLL_UART4_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define MX6UL_UART7_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SL_UART2_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define MX6SLL_UART2_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define MX6UL_UART8_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
+#define MX6SL_UART3_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SLL_UART3_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SL_UART4_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000)
+
#ifndef CONFIG_MX6SX
#define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000)
#endif
+#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000)
#define UART1_BASE (ATZ1_BASE_ADDR + 0x20000)
#define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000)
#define UART8_BASE (ATZ1_BASE_ADDR + 0x24000)
@@ -161,7 +161,6 @@
#define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000)
#define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000)
#define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000)
-#endif
#ifndef CONFIG_MX6SX
#define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000)
@@ -176,6 +175,8 @@
#define PWM4_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0xC000)
#define CAN1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x10000)
#define CAN2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x14000)
+/* QOSC on i.MX6SLL */
+#define QOSC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x14000)
#define GPT1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x18000)
#define GPIO1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x1C000)
#define GPIO2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x20000)
@@ -198,11 +199,18 @@
#define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x58000)
#define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000)
#define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000)
-#ifdef CONFIG_MX6SL
+#define IOMUXC_GPR_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
+#ifdef CONFIG_MX6SLL
+#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#define PXP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000)
+#define EPDC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x74000)
+#define DCP_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x7C000)
+#elif defined(CONFIG_MX6SL)
#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000)
#define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
-#elif CONFIG_MX6SX
+#elif defined(CONFIG_MX6SX)
#define CANFD1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000)
#define SDMA_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
#define CANFD2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x70000)
@@ -215,6 +223,9 @@
#define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
#endif
+#define MX6SL_LCDIF_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x78000)
+#define MX6SLL_LCDIF_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x78000)
+
#define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000)
#define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000)
#define AIPS3_ON_BASE_ADDR (ATZ3_BASE_ADDR + 0x7C000)
@@ -249,7 +260,7 @@
#define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000)
#define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000)
#define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000)
-/* i.MX6SL */
+/* i.MX6SL/SLL */
#define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
#ifdef CONFIG_MX6UL
#define ENET2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000)
@@ -263,6 +274,10 @@
#define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000)
#define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000)
#define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000)
+#ifdef CONFIG_MX6SLL
+#define IOMUXC_GPR_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000)
+#define IOMUXC_SNVS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000)
+#endif
#define IP2APB_PERFMON1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000)
#define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000)
#define MX6UL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000)
@@ -296,6 +311,8 @@
#define I2C4_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000)
#define IP2APB_USBPHY1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x78000)
#define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
+/* i.MX6SLL */
+#define MTR_MASTER_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
#ifdef CONFIG_MX6SX
#define GIS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x04000)
@@ -334,7 +351,8 @@
#define MX6SX_LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000)
#define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
-#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+ defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL))
#define IRAM_SIZE 0x00040000
#else
#define IRAM_SIZE 0x00020000
@@ -348,10 +366,14 @@
/* only for i.MX6SX/UL */
#define WDOG3_BASE_ADDR ((is_mx6ul() ? \
MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR))
-#define LCDIF1_BASE_ADDR ((is_mx6ul()) ? \
+#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6SLL)) ? \
+ MX6SLL_LCDIF_BASE_ADDR : \
+ (is_cpu_type(MXC_CPU_MX6SL)) ? \
+ MX6SL_LCDIF_BASE_ADDR : \
+ ((is_cpu_type(MXC_CPU_MX6UL)) ? \
MX6UL_LCDIF1_BASE_ADDR : \
((is_mx6ull()) ? \
- MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR))
+ MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)))
extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
@@ -672,7 +694,7 @@ struct cspi_regs {
#define MXC_CSPICON_POL 4 /* SCLK polarity */
#define MXC_CSPICON_SSPOL 12 /* SS polarity */
#define MXC_CSPICON_CTL 20 /* inactive state of SCLK */
-#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
+#if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL)
|| defined(CONFIG_MX6UL)
#define MXC_SPI_BASE_ADDRESSES \
ECSPI1_BASE_ADDR, \
ECSPI2_BASE_ADDR, \
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
