On Fri, Nov 25, 2016 at 6:02 PM, Phil Edworthy <phil.edwor...@renesas.com> wrote: > Hi Jagan, > > On 02 November 2016 15:16, Phil wrote: >> This series has fixes, patches to clean the code up, and add support for >> specifying the sampling edge. >> >> Phil Edworthy (7): >> spi: cadence_qspi: Fix clearing of pol/pha bits >> spi: cadence_qspi: Fix baud rate calculation >> spi: cadence_qspi: Use #define for bits instead of bit shifts >> spi: cadence_qspi: Clean up the #define names >> spi: cadence_qspi: Remove returns from end of void functions >> spi: cadence_qspi: Fix CQSPI_CAL_DELAY calculation >> spi: cadence_qspi: Support specifying the sample edge used >> >> doc/device-tree-bindings/spi/spi-cadence.txt | 2 + >> drivers/spi/cadence_qspi.c | 10 +- >> drivers/spi/cadence_qspi.h | 3 +- >> drivers/spi/cadence_qspi_apb.c | 164 >> +++++++++++++-------------- >> 4 files changed, 88 insertions(+), 91 deletions(-) > > I've sent a couple of new versions of some of these patches based on feedback > and something I noticed, but most have not had any comments. > Would you like me to send the whole series again with the latest versions?
Yes, please do that. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot