This is a combined series of the fixes to SH2/SH3/SH4/SH4A architecture port
of U-boot on top of the master branch, there is no functional difference
between this series and 3 my series sent in August 2016 for 2016.09, however
due to many positive generalization updates to U-boot sources the old
unreviewed series can not be cleanly applied anymore:
* [PATCH 0/6] sh4: fix and simplify cache manipulation
* [PATCH 0/5] sh4: fixes to SH7751 PCI host controller
* [PATCH] common: sh: add necessary define bits to board_f
* [PATCH 00/12] sh: change arch and boards code to generic board
I have to resend the changes, because apparently Nobuhiro Iwamatsu is
too busy to maintain SH port and I ask Tom/Simon/Marek and other active
U-boot developers to review and apply the changes, it is highly desirable
to have a possibility to run modern U-boot on boards powered by SH cores.
The changeset implements initial support of relocatable U-Boot code
for SH2/SH3/SH4 architectures and boards, as weel as it restores
a possibility to boot U-Boot on SH boards, which has not been converted
to generic board in time (for more details see commit f41e6088eb1
("sh: Fix build errors for generic board")). Special attention from
maintainers of all touched boards is required, due to inaccessibility
of hardware for me it would be a troublesome task.
*** CACHE SUPPORT COVER LETTER ***
In my tests I experience that sometimes SH4 does not properly
fetch instructions after immediate jump to a code loaded by
means of rtl8139, the problem is gone if "icache off" is
executed after load or if cache invalidation and write-back
is used on data load instead of just cache invalidation,
which is apparently an improper backbone of flush_dcache_range()
function.
The changeset contains a couple of bugfixes and a general
simplification of the code related to cache manipulation. Note
that while caches are found on SH2 and SH3 for long time
they were inactive in U-Boot, because I don't have SH2/SH3
hardware for testing I don't spread SH4 cache fixes to those
cpus, however generally it should be the same, in that case
arch/sh/cpu/sh4/cache.c file can be moved to arch/sh/lib
folder
*** PCI CONTROLLER CHANGES COVER LETTER ***
This series fixes 2 bugs found in SH7751 PCI host controller driver,
also it restores r2dplus defconfig and slightly simplifies the code
related to the SH7751 PCI controller, more improvements may follow
in future.
The change is independent on the following conversion to generic
board, however it adds some bits to simplify porting of r2dplus
board by moving board specific CONFIG_SYS_TEXT_BASE into P1 area,
Before the change even if rtl8139 driver is selected in a defconfig
the device was unusable due to invalid phys to bus mapping (e.g. test
with 'dhcp' command shows it), this most probably was caused by some
unnoticed generic change in PCI driver framework, however now it is
fixed by the series.
*** GENERIC BOARD CHANGES COVER LETTER ***
Now code/data initialization and relocation in general resemble the
procedure on ARM with minor peculiarities (same one relocation from a
storage device if calculated reloc_off == 0, otherwise two relocations),
however please note that the change does *not* add PIE support (only PIC),
so it may end up that there are persistent pointers to some non-relocated
data, this point requires better investion.
Only r2dplus board is actually converted to support new architectural
changes, the rest of the boards require attention from board maintainers
or they will be removed. Board maintainers may pay attention to
CONFIG_SYS_MALLOC_CLEAR_ON_INIT, CONFIG_NEEDS_MANUAL_RELOC,
CONFIG_SYS_GENERIC_GLOBAL_DATA etc. options.
This r2dplus board change allows immediately check the correctness of
the series on a r2dplus qemu target, note that the second copy is
not avoided in this case, also for simplicity SDRAM area up to text base
is large enough to store malloc pool and two copies of loaded code/data.
The change was tested on one custom SH4 (SH7551R) board, r2dplus qemu
target (see also SH7751 PCI change under review), the rest of the boards
are compile tested only.
Multiple kudos to Simon for great patience and a decision to not remove
the code.
Vladimir Zapolskiy (24):
sh4: cache: correct dcache flush to invalidate with write-back
sh4: cache: correct flush_cache() to writeback and invalidate
sh3: remove unused cache.c file from being built
sh: cache use jump_to_P2() and back_to_P1() from asm/system.h
sh: cache: don't modify CCR from P1 area
sh4: cache: move exported cache manipulation functions into cache.c
pci: sh7751: fix up PCI I/O space address
pci: sh7751: map PCI memory space into SDRAM
sh4: remove __io config options from r2dplus and r7780mp boards
r2dplus: use P1 area space for text base and PCI system memory
r2dplus: select rtl8139 driver in defconfig
common: sh: add necessary define bits to board_f
sh4: use single u-boot linker script for all boards
sh: place board lowlevel_init code in the beginning of .text
sh: define entry point and reloc_dst inside a linker script
sh: add MEMORY command to a shared linker script
sh: remove undefined DEBUG preprocessor token from board config files
sh: define CONFIG_DISPLAY_BOARDINFO to print board information
sh: add common dram_init() function for all boards
sh: add shared relocate_code() function and call board_init_r()
sh4: fix start.S by calling board_init_f() after first code relocation
sh: share the correct version of start.S among all cpus
sh: generate position independent code for all platforms
r2dplus: fixup CONFIG_SYS_TEXT_BASE to account arch/sh changes
arch/sh/Makefile | 2 +-
arch/sh/config.mk | 2 +-
arch/sh/cpu/sh2/Makefile | 1 -
arch/sh/cpu/sh2/cpu.c | 6 --
arch/sh/cpu/sh3/Makefile | 3 +-
arch/sh/cpu/sh3/cache.c | 96 ------------------------------
arch/sh/cpu/sh3/cpu.c | 6 --
arch/sh/cpu/sh3/start.S | 65 --------------------
arch/sh/cpu/sh4/Makefile | 1 -
arch/sh/cpu/sh4/cache.c | 88 +++++++++++++--------------
arch/sh/cpu/sh4/cpu.c | 40 -------------
arch/sh/cpu/sh4/start.S | 62 -------------------
arch/sh/cpu/u-boot.lds | 44 +++++++-------
arch/sh/include/asm/cache.h | 2 -
arch/sh/include/asm/io.h | 10 ----
arch/sh/lib/Makefile | 2 +
arch/sh/lib/board.c | 35 +++++++++++
arch/sh/{cpu/sh2 => lib}/start.S | 33 +++++-----
board/alphaproject/ap_sh4a_4a/Makefile | 2 +-
board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c | 11 ----
board/espt/Makefile | 2 +-
board/espt/espt.c | 10 ----
board/mpr2/Makefile | 2 +-
board/mpr2/mpr2.c | 10 ----
board/ms7720se/Makefile | 2 +-
board/ms7720se/ms7720se.c | 10 ----
board/ms7722se/Makefile | 2 +-
board/ms7722se/ms7722se.c | 10 ----
board/ms7750se/Makefile | 2 +-
board/ms7750se/ms7750se.c | 10 ----
board/renesas/MigoR/Makefile | 2 +-
board/renesas/MigoR/migo_r.c | 10 ----
board/renesas/ap325rxa/Makefile | 2 +-
board/renesas/ap325rxa/ap325rxa.c | 10 ----
board/renesas/ecovec/Makefile | 2 +-
board/renesas/ecovec/ecovec.c | 10 ----
board/renesas/r0p7734/Makefile | 2 +-
board/renesas/r0p7734/r0p7734.c | 11 ----
board/renesas/r2dplus/Makefile | 2 +-
board/renesas/r2dplus/r2dplus.c | 10 ----
board/renesas/r7780mp/Makefile | 2 +-
board/renesas/r7780mp/r7780mp.c | 10 ----
board/renesas/rsk7203/Makefile | 2 +-
board/renesas/rsk7203/rsk7203.c | 10 ----
board/renesas/rsk7264/Makefile | 2 +-
board/renesas/rsk7264/rsk7264.c | 10 ----
board/renesas/rsk7269/Makefile | 2 +-
board/renesas/rsk7269/rsk7269.c | 10 ----
board/renesas/sh7752evb/Makefile | 2 +-
board/renesas/sh7752evb/sh7752evb.c | 11 ----
board/renesas/sh7752evb/u-boot.lds | 82 -------------------------
board/renesas/sh7753evb/Makefile | 2 +-
board/renesas/sh7753evb/sh7753evb.c | 11 ----
board/renesas/sh7753evb/u-boot.lds | 82 -------------------------
board/renesas/sh7757lcr/Makefile | 2 +-
board/renesas/sh7757lcr/sh7757lcr.c | 25 --------
board/renesas/sh7757lcr/u-boot.lds | 83 --------------------------
board/renesas/sh7763rdp/Makefile | 2 +-
board/renesas/sh7763rdp/sh7763rdp.c | 10 ----
board/renesas/sh7785lcr/Makefile | 2 +-
board/renesas/sh7785lcr/sh7785lcr.c | 10 ----
board/shmin/Makefile | 2 +-
board/shmin/shmin.c | 10 ----
common/board_f.c | 15 +++--
configs/r2dplus_defconfig | 2 +
drivers/pci/pci_sh7751.c | 12 ++--
include/configs/MigoR.h | 2 +-
include/configs/ap325rxa.h | 2 +-
include/configs/ap_sh4a_4a.h | 2 +-
include/configs/ecovec.h | 2 +-
include/configs/espt.h | 1 +
include/configs/mpr2.h | 2 +
include/configs/ms7720se.h | 1 +
include/configs/ms7722se.h | 1 +
include/configs/ms7750se.h | 2 +
include/configs/r0p7734.h | 2 +-
include/configs/r2dplus.h | 15 +++--
include/configs/r7780mp.h | 4 +-
include/configs/rsk7203.h | 2 +-
include/configs/rsk7264.h | 3 +-
include/configs/rsk7269.h | 3 +-
include/configs/sh7752evb.h | 3 +-
include/configs/sh7753evb.h | 3 +-
include/configs/sh7757lcr.h | 3 +-
include/configs/sh7763rdp.h | 1 +
include/configs/sh7785lcr.h | 2 +-
include/configs/shmin.h | 1 +
87 files changed, 190 insertions(+), 912 deletions(-)
delete mode 100644 arch/sh/cpu/sh3/cache.c
delete mode 100644 arch/sh/cpu/sh3/start.S
delete mode 100644 arch/sh/cpu/sh4/start.S
create mode 100644 arch/sh/lib/board.c
rename arch/sh/{cpu/sh2 => lib}/start.S (56%)
delete mode 100644 board/renesas/sh7752evb/u-boot.lds
delete mode 100644 board/renesas/sh7753evb/u-boot.lds
delete mode 100644 board/renesas/sh7757lcr/u-boot.lds
--
2.10.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
