Hi Heiko, On 29 November 2016 at 16:45, Heiko Stübner <he...@sntech.de> wrote: > Hi Simon, > > Am Sonntag, 27. November 2016, 10:01:40 schrieb Simon Glass: >> This v3 patch is an update on Sjoerd's original v2 series from Feburary. >> I have dealt with the changes requested at the time, and adjusted the way >> that the speed change is handled. >> >> Tested on firefly-rk3288, rock2. > > Tested on a firefly as well. Though I get mixed results in my netboot > environment. At 100MBit (manually limited) everything seems fine: > > ---------------------- > Speed: 100, full duplex > BOOTP broadcast 1 > BOOTP broadcast 2 > DHCP client bound to address 192.168.140.58 (269 ms) > Using ethernet@ff290000 device > TFTP from server 192.168.140.1; our IP address is 192.168.140.58 > Filename 'hstuebner/firefly.vmlinuz'. > Load address: 0x4000000 > Loading: ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ######################### > 2.9 MiB/s > done > Bytes transferred = 7033483 (6b528b hex) > ---------------------- > > 5 out of 5 boots worked fine. > > > but at 1000MHz I only get: > > ---------------------- > Speed: 1000, full duplex > BOOTP broadcast 1 > BOOTP broadcast 2 > DHCP client bound to address 192.168.140.57 (270 ms) > Using ethernet@ff290000 device > TFTP from server 192.168.140.1; our IP address is 192.168.140.57 > Filename 'hstuebner/firefly.vmlinuz'. > Load address: 0x4000000 > Loading: #####T #T #T ##T T #T #T T ####T #T #### > Retry count exceeded; starting again > ---------------------- > > on 5 boots. 1 lonely boot also worked at 1000MBit for some unknown reason. > I'm not sure if just my switch is some special snowflake (TL-SG1024 from TP- > Link) or there is some other voodoo at work here. > > The rootfs over nfs seems to work fine on 1000MBit though.
Yes I see some timeouts, although I don't think it is anything to do with the driver conversion. Or does this not happen unless my patches are applied? > > > Heiko > [..] Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot