From: Jagan Teki <ja...@amarulasolutions.com>

This patch add driver model support for fec_mxc driver.

Cc: Simon Glass <s...@chromium.org>
Cc: Joe Hershberger <joe.hershber...@ni.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Michael Trimarchi <mich...@amarulasolutions.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
Changes for v3:
- Removed the stub functions[1] and revert back to previous changes where 
#ifdef on
  each function call. We can't use the stub functions to minimize the #ifdef's 
as the
  driver is organize the code in such a way that it can't modularized the code. 
So better
  to use #ifdef to not to break the non-dm.

[1] 
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=fa2ce02b73fa59fe91d2d0ad61bf837392e03ab9

 drivers/net/fec_mxc.c | 268 +++++++++++++++++++++++++++++++++++++++++++++-----
 drivers/net/fec_mxc.h |   4 +
 2 files changed, 246 insertions(+), 26 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index b642770..fd96c43 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -9,6 +9,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <malloc.h>
 #include <memalign.h>
 #include <net.h>
@@ -368,10 +369,20 @@ static int fec_get_hwaddr(int dev_id, unsigned char *mac)
        return !is_valid_ethaddr(mac);
 }
 
+#ifdef CONFIG_DM_ETH
+static int fecmxc_set_hwaddr(struct udevice *dev)
+#else
 static int fec_set_hwaddr(struct eth_device *dev)
+#endif
 {
+#ifdef CONFIG_DM_ETH
+       struct fec_priv *fec = dev_get_priv(dev);
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       uchar *mac = pdata->enetaddr;
+#else
        uchar *mac = dev->enetaddr;
        struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
 
        writel(0, &fec->eth->iaddr1);
        writel(0, &fec->eth->iaddr2);
@@ -426,9 +437,17 @@ static void fec_reg_setup(struct fec_priv *fec)
  * Start the FEC engine
  * @param[in] dev Our device to handle
  */
+#ifdef CONFIG_DM_ETH
+static int fec_open(struct udevice *dev)
+#else
 static int fec_open(struct eth_device *edev)
+#endif
 {
+#ifdef CONFIG_DM_ETH
+       struct fec_priv *fec = dev_get_priv(dev);
+#else
        struct fec_priv *fec = (struct fec_priv *)edev->priv;
+#endif
        int speed;
        uint32_t addr, size;
        int i;
@@ -534,14 +553,26 @@ static int fec_open(struct eth_device *edev)
        return 0;
 }
 
+#ifdef CONFIG_DM_ETH
+static int fecmxc_init(struct udevice *dev)
+#else
 static int fec_init(struct eth_device *dev, bd_t* bd)
+#endif
 {
+#ifdef CONFIG_DM_ETH
+       struct fec_priv *fec = dev_get_priv(dev);
+#else
        struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
        uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
        int i;
 
        /* Initialize MAC address */
+#ifdef CONFIG_DM_ETH
+       fecmxc_set_hwaddr(dev);
+#else
        fec_set_hwaddr(dev);
+#endif
 
        /*
         * Setup transmit descriptors, there are two in total.
@@ -595,9 +626,17 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
  * Halt the FEC engine
  * @param[in] dev Our device to handle
  */
+#ifdef CONFIG_DM_ETH
+static void fecmxc_halt(struct udevice *dev)
+#else
 static void fec_halt(struct eth_device *dev)
+#endif
 {
+#ifdef CONFIG_DM_ETH
+       struct fec_priv *fec = dev_get_priv(dev);
+#else
        struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
        int counter = 0xffff;
 
        /*
@@ -637,7 +676,11 @@ static void fec_halt(struct eth_device *dev)
  * @param[in] length Data count in bytes
  * @return 0 on success
  */
+#ifdef CONFIG_DM_ETH
+static int fecmxc_send(struct udevice *dev, void *packet, int length)
+#else
 static int fec_send(struct eth_device *dev, void *packet, int length)
+#endif
 {
        unsigned int status;
        uint32_t size, end;
@@ -649,7 +692,11 @@ static int fec_send(struct eth_device *dev, void *packet, 
int length)
         * This routine transmits one frame.  This routine only accepts
         * 6-byte Ethernet addresses.
         */
+#ifdef CONFIG_DM_ETH
+       struct fec_priv *fec = dev_get_priv(dev);
+#else
        struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
 
        /*
         * Check for valid length of data.
@@ -782,9 +829,17 @@ out:
  * @param[in] dev Our ethernet device to handle
  * @return Length of packet read
  */
+#ifdef CONFIG_DM_ETH
+static int fecmxc_recv(struct udevice *dev, int flags, uchar **packetp)
+#else
 static int fec_recv(struct eth_device *dev)
+#endif
 {
+#ifdef CONFIG_DM_ETH
+       struct fec_priv *fec = dev_get_priv(dev);
+#else
        struct fec_priv *fec = (struct fec_priv *)dev->priv;
+#endif
        struct fec_bd *rbd = &fec->rbd_base[fec->rbd_index];
        unsigned long ievent;
        int frame_length, len = 0;
@@ -800,8 +855,13 @@ static int fec_recv(struct eth_device *dev)
        writel(ievent, &fec->eth->ievent);
        debug("fec_recv: ievent 0x%lx\n", ievent);
        if (ievent & FEC_IEVENT_BABR) {
+#ifdef CONFIG_DM_ETH
+               fecmxc_halt(dev);
+               fecmxc_init(dev);
+#else
                fec_halt(dev);
                fec_init(dev, fec->bd);
+#endif
                printf("some error: 0x%08lx\n", ievent);
                return 0;
        }
@@ -813,10 +873,18 @@ static int fec_recv(struct eth_device *dev)
        if (ievent & FEC_IEVENT_GRA) {
                /* Graceful stop complete */
                if (readl(&fec->eth->x_cntrl) & 0x00000001) {
+#ifdef CONFIG_DM_ETH
+                       fecmxc_halt(dev);
+#else
                        fec_halt(dev);
+#endif
                        writel(~0x00000001 & readl(&fec->eth->x_cntrl),
                                        &fec->eth->x_cntrl);
+#ifdef CONFIG_DM_ETH
+                       fecmxc_init(dev);
+#else
                        fec_init(dev, fec->bd);
+#endif
                }
        }
 
@@ -970,6 +1038,33 @@ static void fec_free_descs(struct fec_priv *fec)
        free(fec->tbd_base);
 }
 
+struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
+{
+       struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
+       struct mii_dev *bus;
+       int ret;
+
+       bus = mdio_alloc();
+       if (!bus) {
+               printf("mdio_alloc failed\n");
+               return NULL;
+       }
+       bus->read = fec_phy_read;
+       bus->write = fec_phy_write;
+       bus->priv = eth;
+       fec_set_dev_name(bus->name, dev_id);
+
+       ret = mdio_register(bus);
+       if (ret) {
+               printf("mdio_register failed\n");
+               free(bus);
+               return NULL;
+       }
+       fec_mii_setspeed(eth);
+       return bus;
+}
+
+#ifndef CONFIG_DM_ETH
 #ifdef CONFIG_PHYLIB
 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
                struct mii_dev *bus, struct phy_device *phydev)
@@ -1061,32 +1156,6 @@ err1:
        return ret;
 }
 
-struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
-{
-       struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
-       struct mii_dev *bus;
-       int ret;
-
-       bus = mdio_alloc();
-       if (!bus) {
-               printf("mdio_alloc failed\n");
-               return NULL;
-       }
-       bus->read = fec_phy_read;
-       bus->write = fec_phy_write;
-       bus->priv = eth;
-       fec_set_dev_name(bus->name, dev_id);
-
-       ret = mdio_register(bus);
-       if (ret) {
-               printf("mdio_register failed\n");
-               free(bus);
-               return NULL;
-       }
-       fec_mii_setspeed(eth);
-       return bus;
-}
-
 int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
 {
        uint32_t base_mii;
@@ -1146,3 +1215,150 @@ int fecmxc_register_mii_postcall(struct eth_device 
*dev, int (*cb)(int))
        return 0;
 }
 #endif
+
+#else
+
+static const struct eth_ops fecmxc_ops = {
+       .start                  = fecmxc_init,
+       .send                   = fecmxc_send,
+       .recv                   = fecmxc_recv,
+       .stop                   = fecmxc_halt,
+       .write_hwaddr           = fecmxc_set_hwaddr,
+};
+
+static int fec_phy_init(struct fec_priv *priv, struct udevice *dev)
+{
+       struct phy_device *phydev;
+       int mask = 0xffffffff;
+
+#ifdef CONFIG_PHYLIB
+       mask = 1 << CONFIG_FEC_MXC_PHYADDR;
+#endif
+
+       phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
+       if (!phydev)
+               return -ENODEV;
+
+       phy_connect_dev(phydev, dev);
+
+       priv->phydev = phydev;
+       phy_config(phydev);
+
+       return 0;
+}
+
+static int fecmxc_probe(struct udevice *dev)
+{
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       struct fec_priv *priv = dev_get_priv(dev);
+       struct mii_dev *bus = NULL;
+       int dev_id = -1;
+       unsigned char ethaddr[6];
+       uint32_t start;
+       int ret;
+
+       ret = fec_alloc_descs(priv);
+       if (ret)
+               return ret;
+
+       bus = fec_get_miibus((uint32_t)priv->eth, dev_id);
+       if (!bus)
+               goto err_mii;
+
+       priv->bus = bus;
+       priv->xcv_type = CONFIG_FEC_XCV_TYPE;
+       priv->interface = pdata->phy_interface;
+       ret = fec_phy_init(priv, dev);
+       if (ret)
+               goto err_phy;
+
+       /* Reset chip. */
+       writel(readl(&priv->eth->ecntrl) | FEC_ECNTRL_RESET, 
&priv->eth->ecntrl);
+       start = get_timer(0);
+       while (readl(&priv->eth->ecntrl) & FEC_ECNTRL_RESET) {
+               if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
+                       printf("FEC MXC: Timeout reseting chip\n");
+                       goto err_timeout;
+               }
+               udelay(10);
+       }
+
+       fec_reg_setup(priv);
+       fec_set_dev_name((char *)dev->name, dev_id);
+       priv->dev_id = (dev_id == -1) ? 0 : dev_id;
+
+       ret = fec_get_hwaddr(dev_id, ethaddr);
+       if (!ret) {
+               debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr);
+               memcpy(pdata->enetaddr, ethaddr, 6);
+               if (!getenv("ethaddr"))
+                       eth_setenv_enetaddr("ethaddr", ethaddr);
+       }
+
+       return 0;
+
+err_timeout:
+       free(priv->phydev);
+err_phy:
+       mdio_unregister(bus);
+       free(bus);
+err_mii:
+       fec_free_descs(priv);
+       return ret;
+}
+
+static int fecmxc_remove(struct udevice *dev)
+{
+       struct fec_priv *priv = dev_get_priv(dev);
+
+       free(priv->phydev);
+       fec_free_descs(priv);
+       mdio_unregister(priv->bus);
+       mdio_free(priv->bus);
+
+       return 0;
+}
+
+static int fecmxc_ofdata_to_platdata(struct udevice *dev)
+{
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       struct fec_priv *priv = dev_get_priv(dev);
+       const char *phy_mode;
+
+       pdata->iobase = (phys_addr_t)dev_get_addr(dev);
+       priv->eth = (struct ethernet_regs *)pdata->iobase;
+
+       pdata->phy_interface = -1;
+       phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+       if (phy_mode)
+               pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+       if (pdata->phy_interface == -1) {
+               debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+               return -EINVAL;
+       }
+
+       /* TODO
+        * Need to get the reset-gpio and related properties from DT
+        * and implemet the enet reset code on .probe call
+        */
+
+       return 0;
+}
+
+static const struct udevice_id fecmxc_ids[] = {
+       { .compatible = "fsl,imx6q-fec" },
+       { }
+};
+
+U_BOOT_DRIVER(fecmxc_gem) = {
+       .name   = "fecmxc",
+       .id     = UCLASS_ETH,
+       .of_match = fecmxc_ids,
+       .ofdata_to_platdata = fecmxc_ofdata_to_platdata,
+       .probe  = fecmxc_probe,
+       .remove = fecmxc_remove,
+       .ops    = &fecmxc_ops,
+       .priv_auto_alloc_size = sizeof(struct fec_priv),
+       .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
+#endif
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 0717cc6..9fc6153 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -264,6 +264,10 @@ struct fec_priv {
        int phy_id;
        int (*mii_postcall)(int);
 #endif
+
+#ifdef CONFIG_DM_ETH
+       u32 interface;
+#endif
 };
 
 /**
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to