From: Jagan Teki <ja...@amarulasolutions.com>
Some I2C bus devicetree nodes, doesn't require to have
gpio pinctrl so replace the dev_info to debug so the
print never comes on the console and for bus that uses
gpio pinctrl anyway have dev_err.
Before:
------
U-Boot> i2c dev 1
Setting bus to 1
i2c bus 1 at 0x21a4000, no gpio pinctrl state.
After:
------
U-Boot> i2c dev 1
Setting bus to 1
Cc: Simon Glass <s...@chromium.org>
Cc: Heiko Schocher <h...@denx.de>
Cc: Peng Fan <peng....@nxp.com>
Cc: Michael Trimarchi <mich...@amarulasolutions.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
drivers/i2c/mxc_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 03a5ce9..94d9027 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -775,7 +775,7 @@ static int mxc_i2c_probe(struct udevice *bus)
*/
ret = fdt_stringlist_search(fdt, node, "pinctrl-names", "gpio");
if (ret < 0) {
- dev_info(dev, "i2c bus %d at 0x%2lx, no gpio pinctrl state.\n",
bus->seq, i2c_bus->base);
+ debug("i2c bus %d at 0x%2lx, no gpio pinctrl state.\n",
bus->seq, i2c_bus->base);
} else {
ret = gpio_request_by_name_nodev(fdt, node, "scl-gpios",
0, &i2c_bus->scl_gpio,
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
