Implement ofdata_to_platdata to set the type to host or device.
- Check "dr-mode" property.
- If there is no "dr-mode", check phy_ctrl for i.MX6
and phy_status for i.MX7
Signed-off-by: Peng Fan <peng....@nxp.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Simon Glass <s...@chromium.org>
Cc: Stefano Babic <sba...@denx.de>
---
drivers/usb/host/ehci-mx6.c | 66 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 48889c1..91413c9 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -15,10 +15,13 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/sys_proto.h>
#include <dm.h>
#include "ehci.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#define USB_OTGREGS_OFFSET 0x000
#define USB_H1REGS_OFFSET 0x200
#define USB_H2REGS_OFFSET 0x400
@@ -48,6 +51,7 @@
#define ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS 0x00000040
#define USBNC_OFFSET 0x200
+#define USBNC_PHY_STATUS_OFFSET 0x23C
#define USBNC_PHYSTATUS_ID_DIG (1 << 4) /* otg_id status */
#define USBNC_PHYCFG2_ACAENB (1 << 4) /* otg_id detection enable */
#define UCTRL_PWR_POL (1 << 9) /* OTG Polarity of Power Pin */
@@ -417,6 +421,67 @@ static const struct ehci_ops mx6_ehci_ops = {
.init_after_reset = mx6_init_after_reset
};
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+ struct usb_platdata *plat = dev_get_platdata(dev);
+ void *__iomem addr = (void *__iomem)dev_get_addr(dev);
+ void *__iomem phy_ctrl, *__iomem phy_status;
+ const void *blob = gd->fdt_blob;
+ int offset = dev->of_offset, phy_off;
+ const char *mode;
+ u32 val;
+
+ mode = fdt_getprop(blob, offset, "dr_mode", NULL);
+ if (mode) {
+ if (strcmp(mode, "peripheral") == 0)
+ plat->init_type = USB_INIT_DEVICE;
+ else if (strcmp(mode, "host") == 0)
+ plat->init_type = USB_INIT_HOST;
+ else if (strcmp(mode, "otg") == 0)
+ plat->init_type = USB_INIT_HOST;
+ else
+ return -EINVAL;
+ } else {
+ /*
+ * About fsl,usbphy, Refer to
+ * Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt.
+ */
+ if (is_mx6()) {
+ phy_off = fdtdec_lookup_phandle(blob,
+ offset,
+ "fsl,usbphy");
+ if (phy_off < 0)
+ return -EINVAL;
+
+ addr = (void __iomem *)fdtdec_get_addr(blob, phy_off,
+ "reg");
+ if ((fdt_addr_t)addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ phy_ctrl = (void __iomem *)(addr + USBPHY_CTRL);
+ val = readl(phy_ctrl);
+
+ if (val & USBPHY_CTRL_OTG_ID)
+ plat->init_type = USB_INIT_DEVICE;
+ else
+ plat->init_type = USB_INIT_HOST;
+ } else if (is_mx7()) {
+ phy_status = (void __iomem *)(addr +
+ USBNC_PHY_STATUS_OFFSET);
+ val = readl(phy_status);
+
+ if (val & USBNC_PHYSTATUS_ID_DIG)
+ plat->init_type = USB_INIT_DEVICE;
+ else
+ plat->init_type = USB_INIT_HOST;
+ } else {
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static int ehci_usb_probe(struct udevice *dev)
{
struct usb_platdata *plat = dev_get_platdata(dev);
@@ -460,6 +525,7 @@ U_BOOT_DRIVER(usb_mx6) = {
.name = "ehci_mx6",
.id = UCLASS_USB,
.of_match = mx6_usb_ids,
+ .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
.probe = ehci_usb_probe,
.remove = ehci_deregister,
.ops = &ehci_usb_ops,
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
