From: Stefan Agner <stefan.ag...@toradex.com> Before commit 81c4eccb55cc ("imx: mx6: fix USB bmode to use reserved value") a non-reserved value has been used to trigger Serial Downloader using bmode, which translated to a GPR9 value of 0x10. However, on some boards the non-reserved value lead to unreliable bmode command. With the above mentioned commit, U-boot switched to use [7:4] b0001, which translates to GPR9 0x10 for Serial Downloader mode. Check for the new value and classify it as Serial Downloader mode.
Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> CC: Stefano Babic <sba...@denx.de> CC: Tim Harvey <thar...@gateworks.com> CC: Fabio Estevam <fabio.este...@freescale.com> CC: Eric Nelson <eric.nel...@boundarydevices.com> --- arch/arm/imx-common/spl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c index bdcda7de93..098953dce1 100644 --- a/arch/arm/imx-common/spl.c +++ b/arch/arm/imx-common/spl.c @@ -26,8 +26,7 @@ u32 spl_boot_device(void) * Check for BMODE if serial downloader is enabled * BOOT_MODE - see IMX6DQRM Table 8-1 */ - if ((((bmode >> 24) & 0x03) == 0x01) || /* Serial Downloader */ - (gpr10_boot && (reg == 1))) + if (((bmode >> 24) & 0x03) == 0x01) /* Serial Downloader */ return BOOT_DEVICE_UART; /* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */ switch ((reg & 0x000000FF) >> 4) { @@ -39,6 +38,9 @@ u32 spl_boot_device(void) else return BOOT_DEVICE_NOR; break; + /* Reserved: Used to force Serial Downloader */ + case 0x1: + return BOOT_DEVICE_UART; /* SATA: See 8.5.4, Table 8-20 */ case 0x2: return BOOT_DEVICE_SATA; -- 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot