On 16/12/2016 22:04, Kevin Hilman wrote:
> Enable USB gadget ethernet by default to have networking capabilities.
>
> Tested using DHCP and TFTP to transfer kernel, DT, ramdisk.
>
> Cc: Fabio Estevam <feste...@gmail.com>
> Signed-off-by: Kevin Hilman <khil...@baylibre.com>
> ---
> Applies to v2016.11
>
> board/warp7/warp7.c | 14 ++++++++++++++
> configs/warp7_defconfig | 5 +++++
> include/configs/warp7.h | 7 +++++++
> 3 files changed, 26 insertions(+)
>
> diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c
> index da9afb4ccd86..df8e9da6f919 100644
> --- a/board/warp7/warp7.c
> +++ b/board/warp7/warp7.c
> @@ -19,6 +19,7 @@
> #include <mmc.h>
> #include <asm/arch/crm_regs.h>
> #include <usb.h>
> +#include <netdev.h>
> #include <power/pmic.h>
> #include <power/pfuze3000_pmic.h>
> #include "../freescale/common/pfuze.h"
> @@ -138,6 +139,19 @@ int power_init_board(void)
> }
> #endif
>
> +int board_eth_init(bd_t *bis)
> +{
> + int ret = 0;
> +
> +#ifdef CONFIG_USB_ETHER
> + ret = usb_eth_initialize(bis);
> + if (ret < 0)
> + printf("Error %d registering USB ether.\n", ret);
> +#endif
> +
> + return ret;
> +}
> +
> int board_init(void)
> {
> /* address of boot parameters */
> diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig
> index 0f0ec99e50ca..81acd8ff15c8 100644
> --- a/configs/warp7_defconfig
> +++ b/configs/warp7_defconfig
> @@ -35,3 +35,8 @@ CONFIG_G_DNL_MANUFACTURER="FSL"
> CONFIG_G_DNL_VENDOR_NUM=0x0525
> CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
> CONFIG_OF_LIBFDT=y
> +
> +CONFIG_CMD_NET=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_CMD_DHCP=y
> +
> diff --git a/include/configs/warp7.h b/include/configs/warp7.h
> index d3b0c5e0d62c..f4a92319ebad 100644
> --- a/include/configs/warp7.h
> +++ b/include/configs/warp7.h
> @@ -38,6 +38,7 @@
> "script=boot.scr\0" \
> "image=zImage\0" \
> "console=ttymxc0\0" \
> + "ethact=usb_ether\0" \
> "fdt_high=0xffffffff\0" \
> "initrd_high=0xffffffff\0" \
> "fdt_file=imx7s-warp.dtb\0" \
> @@ -145,4 +146,10 @@
> #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
> #define DFU_DEFAULT_POLL_TIMEOUT 300
>
> +#define CONFIG_USB_ETHER
> +#define CONFIG_USB_ETH_CDC
> +#define CONFIG_USB_ETH_RNDIS
> +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
> +#define CONFIG_USBNET_DEV_ADDR "de:ad:be:af:00:01"
> +
> #endif
>
Applied to u-boot-imx, -master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
