On Jum, 2016-12-30 at 06:14 -0600, Dinh Nguyen wrote:
>
> On 12/28/2016 12:34 AM, Chee Tien Fong wrote:
> >
> > From: Tien Fong Chee <tien.fong.c...@intel.com>
> >
> > This patch adding the Arria10 critical hardware initialization
> > before
> > enabling console print out in spl.
> >
> > Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
> > Cc: Marek Vasut <ma...@denx.de>
> > Cc: Dinh Nguyen <dingu...@kernel.org>
> > Cc: Chin Liang See <chin.liang....@intel.com>
> > Cc: Tien Fong <skywind...@gmail.com>
> > ---
> > Changes for V2
> > - Release UART from reset before enalbing console, and reverting
> > license
> > changes.
> > ---
> > arch/arm/mach-socfpga/spl.c | 84
> > +++++++++++++++++++++++++++++++++++++++++++--
> > 1 file changed, 82 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-
> > socfpga/spl.c
> > index fec4c7a..9e27f82 100644
> > --- a/arch/arm/mach-socfpga/spl.c
> > +++ b/arch/arm/mach-socfpga/spl.c
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (C) 2012 Altera Corporation <www.altera.com>
> > + * Copyright (C) 2012-2016 Altera Corporation <www.altera.com>
> > *
> > * SPDX-License-Identifier: GPL-2.0+
> > */
> > @@ -19,22 +19,32 @@
> > #include <asm/arch/sdram.h>
> > #include <asm/arch/scu.h>
> > #include <asm/arch/nic301.h>
> > +#include <asm/sections.h>
> > +#include <watchdog.h>
> > +#include <fdtdec.h>
> > +#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> > +#include <asm/arch/pinmux.h>
> > +#endif
> >
> > DECLARE_GLOBAL_DATA_PTR;
> >
> > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > static struct pl310_regs *const pl310 =
> > (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
> > static struct scu_registers *scu_regs =
> > (struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
> > static struct nic301_registers *nic301_regs =
> > (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
> > -static struct socfpga_system_manager *sysmgr_regs =
> > +#endif
> > +
> > +static const struct socfpga_system_manager *sysmgr_regs =
> > (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
> >
> > u32 spl_boot_device(void)
> > {
> > const u32 bsel = readl(&sysmgr_regs->bootinfo);
> >
> > +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> > switch (bsel & 0x7) {
> > case 0x1: /* FPGA (HPS2FPGA Bridge) */
> > return BOOT_DEVICE_RAM;
> > @@ -55,6 +65,24 @@ u32 spl_boot_device(void)
> > printf("Invalid boot device (bsel=%08x)!\n",
> > bsel);
> > hang();
> > }
> > +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> > + switch ((bsel>>12) & 0x7) {
> Spaces around the '>>'.
>
> >
> > + case 0x1: /* FPGA (HPS2FPGA Bridge) */
> > + return BOOT_DEVICE_RAM;
> > + case 0x2: /* NAND Flash (1.8V) */
> > + case 0x3: /* NAND Flash (3.0V) */
> > + return BOOT_DEVICE_NAND;
> > + case 0x4: /* SD/MMC External Transceiver (1.8V) */
> > + case 0x5: /* SD/MMC Internal Transceiver (3.0V) */
> > + return BOOT_DEVICE_MMC1;
> > + case 0x6: /* QSPI Flash (1.8V) */
> > + case 0x7: /* QSPI Flash (3.0V) */
> > + return BOOT_DEVICE_SPI;
> > + default:
> > + printf("Invalid boot device (bsel=%08x)!\n",
> > bsel);
> > + hang();
> > + }
> > +#endif
> > }
> You missed my comment from V1:
>
> You should just do a shift define here, so you don't have to add
> all
> this extra code here. Something like
>
> switch ((bsel >> BOOTINFO_BSEL_SHIFT) & 0x7)
>
Okay, noted.
>
> Dinh
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
