On Mon, 12 Oct 2009 12:01:32 +0530
Dudhat Dipen-B09055 <dipen.dud...@freescale.com> wrote:
> > On Oct 9, 2009, at 12:42 PM, Dipen Dudhat wrote:
> >
> >> +void initsdram(void)
> >> +{
> >> +
> >> + volatile ccsr_ddr_t *ddr= (ccsr_ddr_t
> > *)CONFIG_SYS_MPC85xx_DDR_ADDR;
> >> + int d_init, dbw;
> >> + volatile ccsr_gpio_t *pgpio = (void *)
> >> (CONFIG_SYS_MPC85xx_GPIO_ADDR);
> >> + unsigned int ddr_size;
> >> + sys_info_t sysinfo;
> >> + phys_size_t dram_size = 0;
> >> +
> >> + set_next_law(0,LAW_SIZE_1G , LAW_TRGT_IF_DDR_1);
> >> +
> >> + out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
> >> + out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
> >> + out_be32(&ddr->cs0_config_2, CONFIG_SYS_DDR_CS0_CONFIG_2);
> >> +
> >> + out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_667);
> >> + out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_667);
> >> + out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_667);
> >> + out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_667);
> >> + out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_667);
> >> + out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_667);
> >> + out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_667);
> >> + out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_667);
> >> + out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
> >> + out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
> >
> > did fsl_ddr_set_memctl_regs() not work?
> >
> > This function will take more space as we have only 4K space here.
> > And this function contains 'printf' statements which is not valid.
> >
> > So I think this is the simplest approach, as fsl_ddr_set_memctl_regs()
>
> > is doing the same thing.
> > What do you suggest??
>
> We can dummy out the printf. I'd prefer if we can try and use it. It
> unifies the register setting in one place which is key.
>
On Mon, 12 Oct 2009 12:01:32 +0530
Dudhat Dipen-B09055 <dipen.dud...@freescale.com> wrote:
> I have tried using "fsl_ddr_set_memctl_regs()".
> But this can't get fit into 4K NAND_SPL Loader.
by how much? Have you tried using raw i/o accessors (__raw_writel and
friends) instead of the usual out_be32, etc.?
Kim
p.s. please don't top post.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
