As board-specific reset logic, it needs to issue reset signal
via CPLD when issuing 'reset' command in u-boot, this patch
solves the issue of reset command not working on T1024RDB.
Signed-off-by: Shengzhou Liu <shengzhou....@nxp.com>
---
v2: add build condition.
board/freescale/t102xrdb/t102xrdb.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/board/freescale/t102xrdb/t102xrdb.c
b/board/freescale/t102xrdb/t102xrdb.c
index 01dbf38..0f453a7 100644
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -167,6 +167,13 @@ unsigned long get_board_ddr_clk(void)
return CONFIG_DDR_CLK_FREQ;
}
+#ifdef CONFIG_T1024RDB
+void board_reset(void)
+{
+ CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
+}
+#endif
+
int misc_init_r(void)
{
return 0;
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
