Dear Tom Rix, In message <4ad478ae.10...@bumblecow.com> you wrote: > Wolfgang, > > I have cleaned up the commits to arm/master-sync. > > The cleanup is from doing a > git rev-list --reverse master..arm/master > Then working back from my notes to take only the commits > were either misc arm or other arm pull requests. > These were cherry picked on top of the current u-boot/master. > > I ran the MAKEALL regression and the results look like > what I posted on Sunday. > > That said, it would be a good idea to wait a bit for others to > review this list and pick up on anything that I missed. > > I will be offline for about 10hrs and will fix any problems > then. > > Tom > > The following changes since commit 14abfe361b3ed23b02f564e2f5d663e158cd5799: > Wolfgang Denk (1): > Merge branch 'master' of /home/wd/git/u-boot/custodians > > are available in the git repository at: > > git://git.denx.de/u-boot-arm master-sync > > Daniel Gorsulowski (1): > at91: Update MEESC board support > > Dirk Behme (1): > OMAP3 MMC: Fix warning dereferencing type-punned pointer > > Olof Johansson (3): > OMAP3: Clean up whitespace in mux configs > SMC911X: Add chip auto detection > TI: OMAP3: Overo Tobi ethernet support > > Prafulla Wadaskar (2): > Kirkwood: rd6281a: Add kwbimage build support > Kirkwood: mv88f6281gtw_ge: Add kwbimage build support > > Sandeep Paulraj (9): > TI DaVinci: Remove references to SZ_xx > TI DaVinci: DM6446: Fix Compilation error in NAND mode > TI DaVinci: DM646x: Initial Support for DM646x SOC > TI DaVinci: DM355: Config Cleanup and Update > TI DaVinci DM365: Removing header file which does not exist > TI: DaVinci DM365: Minor config cleanup > TI: DaVinci DM646x: Update flag used to represent DM646x SOC's > TI: DaVinci: GPIO header file and definitions > TI: DaVinci DM365: Enabling network Support on DM365 EVM > > Simon Kagstrom (2): > Support for the OpenRD base board > arm: Correct build with CONFIG_SYS_HUSH_PARSER set > > Tom Rix (4): > OMAP3 Move cache routine to cache.S > Add support for Eukrea CPUAT91 SBC > Add support for Eukrea CPU9260/CPU9G20 SBC > TI OMAP3 Use arm init sequence to initialize i2c > > MAINTAINERS | 10 + > MAKEALL | 6 +- > Makefile | 17 + > board/Marvell/mv88f6281gtw_ge/config.mk | 3 + > board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165 +++++++ > board/Marvell/openrd_base/Makefile | 56 +++ > board/Marvell/openrd_base/config.mk | 33 ++ > board/Marvell/openrd_base/kwbimage.cfg | 168 +++++++ > board/Marvell/openrd_base/openrd_base.c | 160 +++++++ > board/Marvell/openrd_base/openrd_base.h | 46 ++ > board/Marvell/rd6281a/config.mk | 3 + > board/Marvell/rd6281a/kwbimage.cfg | 167 +++++++ > board/davinci/dm365evm/dm365evm.c | 44 ++- > board/esd/meesc/meesc.c | 65 +++- > board/eukrea/cpu9260/Makefile | 59 +++ > board/eukrea/cpu9260/config.mk | 1 + > board/eukrea/cpu9260/cpu9260.c | 220 +++++++++ > board/eukrea/cpu9260/led.c | 153 +++++++ > board/eukrea/cpuat91/Makefile | 50 +++ > board/eukrea/cpuat91/config.mk | 1 + > board/eukrea/cpuat91/cpuat91.c | 81 ++++ > board/logicpd/zoom1/zoom1.h | 164 ++++---- > board/logicpd/zoom2/zoom2.h | 188 ++++---- > board/overo/overo.c | 59 +++ > board/overo/overo.h | 645 > ++++++++++++++-------------- > board/pandora/pandora.h | 662 > ++++++++++++++-------------- > board/ti/beagle/beagle.h | 640 > ++++++++++++++-------------- > board/ti/evm/evm.h | 662 > ++++++++++++++-------------- > board/timll/devkit8000/devkit8000.h | 628 > +++++++++++++------------- > cpu/arm920t/at91rm9200/Makefile | 5 +- > cpu/arm920t/at91rm9200/ks8721.c | 249 +++++++++++ > cpu/arm926ejs/at91/lowlevel_init.S | 3 +- > cpu/arm926ejs/davinci/Makefile | 1 + > cpu/arm926ejs/davinci/dm646x.c | 41 ++ > cpu/arm926ejs/kirkwood/cpu.c | 1 + > cpu/arm_cortexa8/cpu.c | 2 +- > cpu/arm_cortexa8/omap3/Makefile | 2 +- > cpu/arm_cortexa8/omap3/board.c | 2 +- > cpu/arm_cortexa8/omap3/cache.S | 191 ++++++++ > cpu/arm_cortexa8/omap3/cache.c | 95 ---- > cpu/arm_cortexa8/start.S | 85 ---- > drivers/mmc/omap3_mmc.c | 48 +-- > drivers/net/smc911x.c | 14 +- > drivers/net/smc911x.h | 7 +- > include/asm-arm/arch-davinci/emac_defs.h | 4 +- > include/asm-arm/arch-davinci/gpio_defs.h | 53 +++ > include/asm-arm/arch-davinci/hardware.h | 11 + > include/asm-arm/arch-davinci/nand_defs.h | 2 +- > include/asm-arm/arch-omap3/mmc.h | 7 + > include/asm-arm/arch-omap3/omap3.h | 2 + > include/asm-arm/arch-omap3/sys_proto.h | 2 +- > include/configs/cpu9260.h | 453 +++++++++++++++++++ > include/configs/cpuat91.h | 228 ++++++++++ > include/configs/davinci_dm355evm.h | 26 +- > include/configs/davinci_dm365evm.h | 11 +- > include/configs/davinci_dvevm.h | 6 +- > include/configs/davinci_schmoogie.h | 3 +- > include/configs/davinci_sffsdr.h | 3 +- > include/configs/davinci_sonata.h | 3 +- > include/configs/devkit8000.h | 1 + > include/configs/meesc.h | 25 +- > include/configs/omap3_beagle.h | 1 + > include/configs/omap3_evm.h | 1 + > include/configs/omap3_overo.h | 18 +- > include/configs/omap3_pandora.h | 1 + > include/configs/omap3_zoom1.h | 1 + > include/configs/omap3_zoom2.h | 1 + > include/configs/openrd_base.h | 220 +++++++++ > include/ks8721.h | 78 ++++ > 69 files changed, 4988 insertions(+), 2075 deletions(-) > create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg > create mode 100644 board/Marvell/openrd_base/Makefile > create mode 100644 board/Marvell/openrd_base/config.mk > create mode 100644 board/Marvell/openrd_base/kwbimage.cfg > create mode 100644 board/Marvell/openrd_base/openrd_base.c > create mode 100644 board/Marvell/openrd_base/openrd_base.h > create mode 100644 board/Marvell/rd6281a/kwbimage.cfg > create mode 100644 board/eukrea/cpu9260/Makefile > create mode 100644 board/eukrea/cpu9260/config.mk > create mode 100644 board/eukrea/cpu9260/cpu9260.c > create mode 100644 board/eukrea/cpu9260/led.c > create mode 100644 board/eukrea/cpuat91/Makefile > create mode 100644 board/eukrea/cpuat91/config.mk > create mode 100644 board/eukrea/cpuat91/cpuat91.c > create mode 100644 cpu/arm920t/at91rm9200/ks8721.c > create mode 100644 cpu/arm926ejs/davinci/dm646x.c > create mode 100644 cpu/arm_cortexa8/omap3/cache.S > delete mode 100644 cpu/arm_cortexa8/omap3/cache.c > create mode 100644 include/asm-arm/arch-davinci/gpio_defs.h > create mode 100644 include/configs/cpu9260.h > create mode 100644 include/configs/cpuat91.h > create mode 100644 include/configs/openrd_base.h > create mode 100644 include/ks8721.h
Thanks. Applied locally. Will run some build tests and then push it out. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de After a heated argument on some trivial matter Nancy [Astor] . . . shouted, ``If I were your wife I would put poison in your coffee!'' Whereupon Winston Churchill with equal heat and sincerity answered, ``And if I were your husband I would drink it.'' _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot