On Sat, Jan 14, 2017 at 01:14:42PM -0800, Stefan Agner wrote: > Hi Tom, > > I think this did not get applied yet?
Thanks for the reminder, testing this now. > > -- > Stefan > > On 2016-12-22 22:51, Stefan Agner wrote: > > From: Stefan Agner <stefan.ag...@toradex.com> > > > > This converts the following to Kconfig: > > CONFIG_SPL_RAM_DEVICE > > > > Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> > > --- > > > > Changes in v3: None > > Changes in v2: None > > > > common/spl/Kconfig | 9 +++++++++ > > include/configs/microblaze-generic.h | 1 - > > include/configs/socfpga_common.h | 1 - > > include/configs/tegra-common.h | 1 - > > include/configs/xilinx_zynqmp.h | 1 - > > include/configs/zynq-common.h | 1 - > > 6 files changed, 9 insertions(+), 5 deletions(-) > > > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > index cba51f5df6..ea084f462b 100644 > > --- a/common/spl/Kconfig > > +++ b/common/spl/Kconfig > > @@ -449,6 +449,15 @@ config SPL_POWER_SUPPORT > > in drivers/power, drivers/power/pmic and drivers/power/regulator > > as part of an SPL build. > > > > +config SPL_RAM_DEVICE > > + bool "Support booting from preloaded image in RAM" > > + depends on SPL > > + default y if MICROBLAZE || ARCH_SOCFPGA || TEGRA || ARCH_ZYNQ > > + help > > + Enable booting of an image already loaded in RAM. The image has to > > + be already in memory when SPL takes over, e.g. loaded by the boot > > + ROM. > > + > > config SPL_SATA_SUPPORT > > bool "Support loading from SATA" > > depends on SPL > > diff --git a/include/configs/microblaze-generic.h > > b/include/configs/microblaze-generic.h > > index 7abffdb2ef..cc90b73fa1 100644 > > --- a/include/configs/microblaze-generic.h > > +++ b/include/configs/microblaze-generic.h > > @@ -284,7 +284,6 @@ > > > > #define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" > > > > -#define CONFIG_SPL_RAM_DEVICE > > #ifdef CONFIG_SYS_FLASH_BASE > > # define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE > > #endif > > diff --git a/include/configs/socfpga_common.h > > b/include/configs/socfpga_common.h > > index 58a6550844..7292469433 100644 > > --- a/include/configs/socfpga_common.h > > +++ b/include/configs/socfpga_common.h > > @@ -309,7 +309,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); > > * 0xFFFF_FF00 ...... End of SRAM > > */ > > #define CONFIG_SPL_FRAMEWORK > > -#define CONFIG_SPL_RAM_DEVICE > > #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR > > #define CONFIG_SPL_MAX_SIZE (64 * 1024) > > > > diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h > > index 23a0e782e0..f30fec84a2 100644 > > --- a/include/configs/tegra-common.h > > +++ b/include/configs/tegra-common.h > > @@ -98,7 +98,6 @@ > > > > /* Defines for SPL */ > > #define CONFIG_SPL_FRAMEWORK > > -#define CONFIG_SPL_RAM_DEVICE > > #define CONFIG_SPL_BOARD_INIT > > #define CONFIG_SPL_NAND_SIMPLE > > #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \ > > diff --git a/include/configs/xilinx_zynqmp.h > > b/include/configs/xilinx_zynqmp.h > > index fb4f6d6806..8845ff425d 100644 > > --- a/include/configs/xilinx_zynqmp.h > > +++ b/include/configs/xilinx_zynqmp.h > > @@ -260,7 +260,6 @@ > > > > #define CONFIG_SPL_FRAMEWORK > > #define CONFIG_SPL_BOARD_INIT > > -#define CONFIG_SPL_RAM_DEVICE > > > > /* u-boot is like dtb */ > > #define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" > > diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h > > index 953e7311a6..e04be5c18c 100644 > > --- a/include/configs/zynq-common.h > > +++ b/include/configs/zynq-common.h > > @@ -296,7 +296,6 @@ > > #define CONFIG_CMD_SPL > > #define CONFIG_SPL_FRAMEWORK > > #define CONFIG_SPL_BOARD_INIT > > -#define CONFIG_SPL_RAM_DEVICE > > > > #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds" -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot