Hi Anatolij,
Thank you very much for you comments.
I will make a new patch to fix these issues.
On 1/14/2017 03:17, Anatolij Gustschin wrote:
Hi,
On Wed, 11 Jan 2017 10:36:48 +0800
Songjun Wu songjun...@microchip.com wrote:
Add driver-model support to this driver.
Signed-off-by: Songjun Wu <songjun...@microchip.com>
---
Changes in v2:
- Due to the peripheral clock driver improvement, remove
the unneccessary clock calling.
drivers/video/Kconfig | 7 +
drivers/video/Makefile | 2 +-
drivers/video/atmel_hlcdfb.c | 314 ++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 319 insertions(+), 4 deletions(-)
there are many issues with this patch. First it needs re-basing to apply
on current master branch. The U-Boot image linking fails with this patch
applied. You change CONFIG_ATMEL_HLCD to CONFIG_VIDEO_ATMEL_HLCD, but
no board config files in include/config are updated accordingly.
If I update for this option e.g. in at91sam9x5ek.h, the driver doesn't
build. The building also doesn't work when I enable DM support.
Please fix all these issues before resubmitting. Thanks.
--
Anatolij
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
