On Tue, 2017-01-17 at 08:33 +0100, Mario Six wrote: > The r1 register is modified several times during the cache-ram setup of > the MPC83xx SoCs. > > Since this SP modification confuses debuggers, we use a general purpose > register to compute the new stack pointer value, and only set the SP > once after all computations are done. > > Signed-off-by: Mario Six <mario....@gdsys.cc> Reviewed-by: Joakim Tjernlund <joakim.tjernl...@infinera.com>
> --- > > Changes in v2: > > Patch added (following a suggestion by Joakim Tjernlund) > > --- > arch/powerpc/cpu/mpc83xx/start.S | 13 ++++++++----- > 1 file changed, 8 insertions(+), 5 deletions(-) > > diff --git a/arch/powerpc/cpu/mpc83xx/start.S > b/arch/powerpc/cpu/mpc83xx/start.S > index 0001687703..c366f615e7 100644 > --- a/arch/powerpc/cpu/mpc83xx/start.S > +++ b/arch/powerpc/cpu/mpc83xx/start.S > @@ -258,14 +258,17 @@ in_flash: > #endif > > /* set up the stack pointer in our newly created > - * cache-ram (r1) */ > - lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h > - ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + > CONFIG_SYS_GBL_DATA_OFFSET)@l > + * cache-ram; use r3 to keep the new SP for now to > + * avoid overiding the SP it uselessly */ > + lis r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h > + ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR + > CONFIG_SYS_GBL_DATA_OFFSET)@l > > li r0, 0 /* Make room for stack frame header and */ > - stwu r0, -4(r1) /* clear final stack frame so that */ > - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ > + stwu r0, -4(r3) /* clear final stack frame so that */ > + stwu r0, -4(r3) /* stack backtraces terminate cleanly */ > > + /* Finally, actually set SP */ > + mr r1, r3 > > /* let the C-code set up the rest */ > /* */ > -- > 2.11.0 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
