All the UniPhier DT files are compiled if CONFIG_ARCH_UNIPHIER
is enabled, but not all of them actually work. For example, when
U-Boot is compiled for ARM 32 bit, 64 bit DT files are also built,
and vice versa. Compile only the combination that makes sense.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
arch/arm/dts/Makefile | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 66ea0b3..3dbbaa7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -81,19 +81,28 @@ dtb-$(CONFIG_ARCH_MVEBU) += \
armada-xp-synology-ds414.dtb \
armada-xp-theadorable.dtb
-dtb-$(CONFIG_ARCH_UNIPHIER) += \
- uniphier-ld11-ref.dtb \
- uniphier-ld20-ref.dtb \
- uniphier-ld4-ref.dtb \
- uniphier-ld6b-ref.dtb \
+dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
+ uniphier-ld11-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD20) += \
+ uniphier-ld20-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD4) += \
+ uniphier-ld4-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_LD6B) += \
+ uniphier-ld6b-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PRO4) += \
uniphier-pro4-ace.dtb \
uniphier-pro4-ref.dtb \
- uniphier-pro4-sanji.dtb \
- uniphier-pro5-4kbox.dtb \
+ uniphier-pro4-sanji.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PRO5) += \
+ uniphier-pro5-4kbox.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_PXS2) += \
uniphier-pxs2-gentil.dtb \
- uniphier-pxs2-vodka.dtb \
- uniphier-sld3-ref.dtb \
+ uniphier-pxs2-vodka.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_SLD3) += \
+ uniphier-sld3-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
uniphier-sld8-ref.dtb
+
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb \
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
