On 01/21/2017 06:31 PM, Dalon Westergreen wrote:
> From: Dalon Westergreen <dalon.westergr...@intel.com>
> 
> The default values for CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
> and CONFIG_SYS_MMCSD_FS_OS_PARTITION have changed and as
> as result the default uboot environment for this board
> needs updating.  This sets the default envirnment to
> use the CONFIG_SYS_MMCSD_FS_BOOT_PARTITION and
> CONFIG_SYS_MMCSD_FS_OS_PARTITION configs for the boot
> and os partitions.
> 
> Also set the default fdtimage value to match the
> devicetree name in the linux kernel for this board.
> 
> Signed-off-by: Dalon Westergreen <dalon.westergr...@intel.com>

Acked-by: Marek Vasut <ma...@denx.de>

but please see my comment on 1/7

> ---
>  include/configs/socfpga_cyclone5_socdk.h | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/include/configs/socfpga_cyclone5_socdk.h 
> b/include/configs/socfpga_cyclone5_socdk.h
> index 7ced6a6..94355ce 100644
> --- a/include/configs/socfpga_cyclone5_socdk.h
> +++ b/include/configs/socfpga_cyclone5_socdk.h
> @@ -44,15 +44,17 @@
>               "bootm ${loadaddr} - ${fdt_addr}\0" \
>       "bootimage=zImage\0" \
>       "fdt_addr=100\0" \
> -     "fdtimage=socfpga.dtb\0" \
> +     "fdtimage=socfpga_cyclone5_socdk.dtb\0" \
>       "bootm ${loadaddr} - ${fdt_addr}\0" \
> -     "mmcroot=/dev/mmcblk0p2\0" \
> +     "mmc_boot=" __stringify(CONFIG_SYS_MMCSD_FS_BOOT_PARTITION) "\0" \
> +     "mmc_os=" __stringify(CONFIG_SYS_MMCSD_FS_OS_PARTITION) "\0" \
> +     "mmcroot=/dev/mmcblk0p${mmc_os}\0" \
>       "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
>               " root=${mmcroot} rw rootwait;" \
>               "bootz ${loadaddr} - ${fdt_addr}\0" \
>       "mmcload=mmc rescan;" \
> -             "load mmc 0:1 ${loadaddr} ${bootimage};" \
> -             "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
> +             "load mmc 0:${mmc_boot} ${loadaddr} ${bootimage};" \
> +             "load mmc 0:${mmc_boot} ${fdt_addr} ${fdtimage}\0" \
>       "qspiload=sf probe && mtdparts default && run ubiload\0" \
>       "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
>               " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
> 


-- 
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to