On 22/01/17 07:16, Kever Yang wrote:
> Hi Andre,
>
> On 01/20/2017 09:53 AM, Andre Przywara wrote:
>> At the moment we load two images from a FIT image: the actual U-Boot
>> image and the DTB. Both times we have very similar code to deal with
>> alignment requirement the media we load from imposes upon us.
>> Factor out this code into a new function, which we just call twice.
>>
>> Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
>> ---
>> common/spl/spl_fit.c | 122
>> +++++++++++++++++++++------------------------------
>> 1 file changed, 51 insertions(+), 71 deletions(-)
>>
>> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
>> index 381ed1f..d4149c5 100644
>> --- a/common/spl/spl_fit.c
>> +++ b/common/spl/spl_fit.c
>> @@ -138,19 +138,58 @@ static int get_aligned_image_size(struct
>> spl_load_info *info, int data_size,
>> return (data_size + info->bl_len - 1) / info->bl_len;
>> }
>> +static int spl_load_fit_image(struct spl_load_info *info, ulong
>> sector,
>> + void *fit, ulong base_offset, int node,
>> + struct spl_image_info *image_info)
>> +{
>> + ulong offset;
>> + size_t length;
>> + ulong load, entry;
>> + void *src;
>> + ulong overhead;
>> + int nr_sectors;
>> +
>> + offset = fdt_getprop_u32(fit, node, "data-offset") + base_offset;
>> + length = fdt_getprop_u32(fit, node, "data-size");
>> + load = fdt_getprop_u32(fit, node, "load");
>> + if (load == -1U && image_info)
>> + load = image_info->load_addr;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> + entry = fdt_getprop_u32(fit, node, "entry");
>> +
>> + overhead = get_aligned_image_overhead(info, offset);
>> + nr_sectors = get_aligned_image_size(info, overhead + length,
>> offset);
>> +
>> + if (info->read(info, sector + get_aligned_image_offset(info,
>> offset),
>> + nr_sectors, (void*)load) != nr_sectors)
>> + return -EIO;
>> + debug("image: dst=%lx, offset=%lx, size=%lx\n", load, offset,
>> + (unsigned long)length);
>> +
>> + src = (void *)load + overhead;
>> +#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
>> + board_fit_image_post_process(&src, &length);
>> +#endif
>> +
>> + memcpy((void*)load, src, length);
>
> For FIT image, we read the first block for header, and then we know the
> offset
> and size for images, is it possible to have an option that we can read
> the image
> data to load address directly without memcpy(), this helps speed up the
> boot time.
We do read directly into the load address (see the marked place above).
But we have to fix up the alignment:
a) The load address may not be cache line aligned. I am not totally
convinced we really need this, but the code takes care of this.
Shouldn't be an issue in practice since most load addresses are already
aligned.
b) More importantly we need to observe the block size of the device we
read from. mkimage packs the images as tightly as possible into the
image, so ATF may start at say offset 0x456 within the FIT image. Given
that the FIT image itself starts at a sector boundary, that may be "in
the middle" of a sector, which is the smallest addressable unit for
block devices. For MMC based storage for instance this is typically 512
bytes. So we read the whole sector and later discard the overhead by
copying the image back in memory.
Questions to you:
1) Is the memcpy really an issue? I take it you use bl31.bin only, which
is probably between 32KB and 64KB. So does the memcpy really contribute
to boot time here?
2) What device do you usually read from? What is the alignment there?
For instance SPI flash has typically an alignment of 1 Byte, so no
adjustment is actually needed. The memcpy routine bails out if dst==src,
so in this case there are no cycles spend on this.
3) Can you tweak mkimage to observe alignment? As I said above, in the
moment it packs it tightly, but I don't see why we couldn't align
everything in the image at the cost of loosing 511 Bytes per embedded
image in the worst case, for instance. This would eventually fold into
the same point as question 2): If everything is aligned already, memcpy
is a NOP.
So one relatively easy and clean solution would be to introduce an
alignment command line option to mkimage. One could optionally specify a
value, to which mkimage would align each embedded images into, leaving
gaps in between. We would still go over all the calculations in the SPL
code, but all the offsets and corrections would end up being 0, so no
copying would be necessary anymore.
Does this sound like a plan?
Cheers,
Andre.
>> +
>> + if (image_info) {
>> + image_info->load_addr = load;
>> + image_info->size = length;
>> + image_info->entry_point = entry;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> int spl_load_simple_fit(struct spl_image_info *spl_image,
>> struct spl_load_info *info, ulong sector, void *fit)
>> {
>> int sectors;
>> - ulong size, load;
>> + ulong size;
>> unsigned long count;
>> + struct spl_image_info image_info;
>> int node, images;
>> - void *load_ptr;
>> - int fdt_offset, fdt_len;
>> - int data_offset, data_size;
>> int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
>> - int src_sector;
>> - void *dst, *src;
>> /*
>> * Figure out where the external images start. This is the base
>> for the
>> @@ -202,82 +241,23 @@ int spl_load_simple_fit(struct spl_image_info
>> *spl_image,
>> return -1;
>> }
>> - /* Get its information and set up the spl_image structure */
>> - data_offset = fdt_getprop_u32(fit, node, "data-offset");
>> - data_size = fdt_getprop_u32(fit, node, "data-size");
>> - load = fdt_getprop_u32(fit, node, "load");
>> - debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
>> - spl_image->load_addr = load;
>> - spl_image->entry_point = load;
>> + /* Load the image and set up the spl_image structure */
>> + spl_load_fit_image(info, sector, fit, base_offset, node, spl_image);
>> spl_image->os = IH_OS_U_BOOT;
>> - /*
>> - * Work out where to place the image. We read it so that the first
>> - * byte will be at 'load'. This may mean we need to load it starting
>> - * before then, since we can only read whole blocks.
>> - */
>> - data_offset += base_offset;
>> - sectors = get_aligned_image_size(info, data_size, data_offset);
>> - load_ptr = (void *)load;
>> - debug("U-Boot size %x, data %p\n", data_size, load_ptr);
>> - dst = load_ptr;
>> -
>> - /* Read the image */
>> - src_sector = sector + get_aligned_image_offset(info, data_offset);
>> - debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n",
>> - dst, src_sector, sectors);
>> - count = info->read(info, src_sector, sectors, dst);
>> - if (count != sectors)
>> - return -EIO;
>> - debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset,
>> - data_size);
>> - src = dst + get_aligned_image_overhead(info, data_offset);
>> -
>> -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
>> - board_fit_image_post_process((void **)&src, (size_t *)&data_size);
>> -#endif
>> -
>> - memcpy(dst, src, data_size);
>> -
>> /* Figure out which device tree the board wants to use */
>> node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
>> if (node < 0) {
>> debug("%s: cannot find FDT node\n", __func__);
>> return node;
>> }
>> - fdt_offset = fdt_getprop_u32(fit, node, "data-offset");
>> - fdt_len = fdt_getprop_u32(fit, node, "data-size");
>> /*
>> - * Read the device tree and place it after the image. There may be
>> - * some extra data before it since we can only read entire blocks.
>> - * And also align the destination address to ARCH_DMA_MINALIGN.
>> + * Read the device tree and place it after the image.
>> + * Align the destination address to ARCH_DMA_MINALIGN.
>> */
>> - dst = (void *)((load + data_size + align_len) & ~align_len);
>> - fdt_offset += base_offset;
>> - sectors = get_aligned_image_size(info, fdt_len, fdt_offset);
>> - src_sector = sector + get_aligned_image_offset(info, fdt_offset);
>> - count = info->read(info, src_sector, sectors, dst);
>> - debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n",
>> - dst, src_sector, sectors);
>> - if (count != sectors)
>> - return -EIO;
>> -
>> - /*
>> - * Copy the device tree so that it starts immediately after the
>> image.
>> - * After this we will have the U-Boot image and its device tree
>> ready
>> - * for us to start.
>> - */
>> - debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset,
>> - fdt_len);
>> - src = dst + get_aligned_image_overhead(info, fdt_offset);
>> - dst = load_ptr + data_size;
>> -
>> -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
>> - board_fit_image_post_process((void **)&src, (size_t *)&fdt_len);
>> -#endif
>> -
>> - memcpy(dst, src, fdt_len);
>> + image_info.load_addr = spl_image->load_addr + spl_image->size;
>> + spl_load_fit_image(info, sector, fit, base_offset, node,
>> &image_info);
>> return 0;
>> }
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
