On Mon, Jan 23, 2017 at 05:27:09PM +0100, Marcin Niestroj wrote: > Hi, > Thanks for review! See my comment below. > > On 23.01.2017 16:56, Tom Rini wrote: > >On Mon, Jan 23, 2017 at 02:39:15PM +0100, Marcin Niestroj wrote: > > > >>chiliSOM is a System On Module (http://http://grinn-global.com/chilisom/). > >>It can't exists on its own, but will be used as part of other boards. > >> > >>Hardware specification: > >> * TI AM335x processor > >> * 128M, 256M or 512M DDR3 memory > >> * up to 256M NAND > >> > >>Here we treat SOM similar to SOC, so we place it inside arch/arm/mach-* > >>directory and make it possible to reuse initialization code (i.e. DDR, > >>NAND init) for all boards that use it. This approach is similar as for > >>liteSOM module. > >> > >>Signed-off-by: Marcin Niestroj <m.niest...@grinn-global.com> > >>--- > >> arch/arm/Kconfig | 2 + > >> arch/arm/Makefile | 1 + > >> arch/arm/mach-chilisom/Kconfig | 4 + > >> arch/arm/mach-chilisom/Makefile | 6 + > >> arch/arm/mach-chilisom/chilisom.c | 185 > >> +++++++++++++++++++++++++ > >> arch/arm/mach-chilisom/include/mach/chilisom.h | 15 ++ > >> 6 files changed, 213 insertions(+) > > > >These don't belong in a new mach directory, this should end up in > >board/grinn/common/ instead, thanks! > > > > This will work for all grinn boards. But the idea is that some other > vendor can make a board that will use chilisom as it's base. And in > that case sources from board/grinn/common/ directory won't compile. > Do you have any idea how to bypass this restriction?
Good question. I think the full answer here is that oops, arch/arm/mach-litesom shouldn't have been ACK'd as other SoMs (say board/solidrun/mx6cuboxi/) just keep everything central to the board directory and expect that derivations will just copy the directory and edit in-place. That said, that is indeed not optimal, especially since you've already done the leg-work to split things for SoM and carrier. Perhaps arch/arm/mach-omap2/am33xx/chilisom.c (depends on CONFIG_AM33XX_CHILISOM, which gets select'd by the boards in question). And then a similar change for mach-litesom into arch/arm/cpu/armv7/mx6/ (which will get moved to arch/arm/mach-imx at some point I believe). Thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot