Rather than having an arch-specific function, use the existing generic one.
Signed-off-by: Simon Glass <[email protected]> --- arch/powerpc/cpu/mpc5xxx/speed.c | 2 +- common/Kconfig | 2 +- common/board_f.c | 3 --- 3 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/cpu/mpc5xxx/speed.c b/arch/powerpc/cpu/mpc5xxx/speed.c index 30a0a358dd..b37c4a5208 100644 --- a/arch/powerpc/cpu/mpc5xxx/speed.c +++ b/arch/powerpc/cpu/mpc5xxx/speed.c @@ -69,7 +69,7 @@ int get_clocks (void) return (0); } -int prt_mpc5xxx_clks (void) +int print_cpuinfo(void) { char buf1[32], buf2[32], buf3[32]; diff --git a/common/Kconfig b/common/Kconfig index 32d72ca95b..c709661454 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -385,7 +385,7 @@ config BOARD_LATE_INIT config DISPLAY_CPUINFO bool "Display information about the CPU during start up" - default y if ARM || BLACKFIN || NIOS2 || X86 || XTENSA + default y if ARM || BLACKFIN || NIOS2 || X86 || XTENSA || MPC5xxx help Display information about the CPU that U-Boot is running on when U-Boot starts up. The function print_cpuinfo() is called diff --git a/common/board_f.c b/common/board_f.c index e5d112dd1e..99c0b5ac78 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -919,9 +919,6 @@ static init_fnc_t init_sequence_f[] = { #if defined(CONFIG_DISPLAY_CPUINFO) print_cpuinfo, /* display cpu info (and speed) */ #endif -#if defined(CONFIG_MPC5xxx) - prt_mpc5xxx_clks, -#endif /* CONFIG_MPC5xxx */ #if defined(CONFIG_DISPLAY_BOARDINFO) show_board_info, #endif -- 2.11.0.483.g087da7b7c-goog _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
