On 14 February 2017 at 07:38, <patrice.chot...@st.com> wrote: > From: Patrice Chotard <patrice.chot...@st.com> > > This is a 96Board compliant board based on STiH410 SoC: > - 1GB DDR > - On-Board USB combo WiFi/Bluetooth RTL8723BU > with PCB soldered antenna > - Ethernet 1000-BaseT > - SATA > - HDMI > - 2 x USB2.0 type A > - 1 x USB2.0 type micro-AB > - SD card slot > - High speed connector (SD/I2C/USB interfaces) > - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
This is great info - you might consider adding it to Kconfig help? > > Signed-off-by: Patrice Chotard <patrice.chot...@st.com> > Reviewed-by: Tom Rini <tr...@konsulko.com> > --- > > v4: _ board.c cleanup, remove serial useless platdata > > v3: _ add entry in board MAINTAINERS > _ remove useless arch/arm/include/asm/arch-stih410/syscfg.h > _ remove useless arch/arm/include/asm/arch-stih410/gpio.h > > > arch/arm/mach-sti/Kconfig | 2 ++ > board/st/stih410-b2260/Kconfig | 19 ++++++++++++ > board/st/stih410-b2260/MAINTAINERS | 7 +++++ > board/st/stih410-b2260/Makefile | 8 +++++ > board/st/stih410-b2260/board.c | 28 ++++++++++++++++++ > configs/stih410-b2260_defconfig | 26 +++++++++++++++++ > include/configs/stih410-b2260.h | 60 > ++++++++++++++++++++++++++++++++++++++ > 7 files changed, 150 insertions(+) > create mode 100644 board/st/stih410-b2260/Kconfig > create mode 100644 board/st/stih410-b2260/MAINTAINERS > create mode 100644 board/st/stih410-b2260/Makefile > create mode 100644 board/st/stih410-b2260/board.c > create mode 100644 configs/stih410-b2260_defconfig > create mode 100644 include/configs/stih410-b2260.h Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot