This function can be used to update the size in the "reg" property
of the NOR FLASH device nodes. This is necessary for boards with
non-fixed NOR FLASH sizes.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Wolfgang Denk <w...@denx.de>
Cc: Gerald Van Baren <vanba...@cideas.com>
---
common/fdt_support.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
include/fdt_support.h | 2 ++
2 files changed, 46 insertions(+), 0 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 89164a1..40ff00a 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -692,3 +692,47 @@ int fdt_pci_dma_ranges(void *blob, int phb_off, struct
pci_controller *hose) {
return 0;
}
#endif
+
+#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+/*
+ * This function can be used to update the size in the "reg" property
+ * of the NOR FLASH device nodes. This is necessary for boards with
+ * non-fixed NOR FLASH sizes.
+ */
+int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
+{
+ char compat[][16] = { "cfi-flash", "jedec-flash" };
+ int off;
+ int len;
+ struct fdt_property *prop;
+ u32 *reg;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ off = fdt_node_offset_by_compatible(blob, -1, compat[i]);
+ while (off != -FDT_ERR_NOTFOUND) {
+ /*
+ * Found one compatible node, now check if this one
+ * has the correct CS
+ */
+ prop = fdt_get_property_w(blob, off, "reg", &len);
+ if (prop) {
+ reg = (u32 *)&prop->data[0];
+ if (reg[0] == cs) {
+ reg[2] = size;
+ fdt_setprop(blob, off, "reg", reg,
+ 3 * sizeof(u32));
+
+ return 0;
+ }
+ }
+
+ /* Move to next compatible node */
+ off = fdt_node_offset_by_compatible(blob, off,
+ compat[i]);
+ }
+ }
+
+ return -1;
+}
+#endif
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 16734c5..0a9dd0d 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -79,5 +79,7 @@ void ft_pci_setup(void *blob, bd_t *bd);
void set_working_fdt_addr(void *addr);
int fdt_resize(void *blob);
+int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size);
+
#endif /* ifdef CONFIG_OF_LIBFDT */
#endif /* ifndef __FDT_SUPPORT_H */
--
1.6.5.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
