Hai,
I have populated ST 64MB chip and found that the nand flash commands work for ST 64MB chip.But the same NAND flash drivers does not work for SAMSUNG flash , Any Help? Also one more issue is that the linux kernel boot is not seen after the "booting the kernel." , even though the kernel image works fine in old u-boot version 2009-08 Any help Please? Arun The log is ============================== ============================== U-Boot 2.0.0-rc9 (Oct 21 2009 - 09:35:47) Board: Phytec phyCORE-i.MX31 NAND device: Manufacturer ID: 0x20, Chip ID: 0x76 (ST Micro NAND 64MiB 3,3V 8-bi t) Scanning device for bad blocks got MAC address from EEPROM: 00:08:EE:01:7B:56 mx31 cpu clock: 513MHz ipg clock : 64133247Hz Malloc space: 0x80000000 -> 0x80400000 (size 4 MB) Stack space : 0x86000000 -> 0x86020000 (size 128 kB) Open /dev/env0 No such file or directory no valid environment found on /dev/env0. Using default environment running /env/bin/init... Hit any key to stop autoboot: 2 type update_kernel nand|nor [<imagename>] to update kernel into flash type update_root nand|nor [<imagename>] to update rootfs into flash uboot:/ devinfo devices: |----cs0 |----mem |----nor0 |----nand0 | |----nand0.kernel | | `----nand0.kernel.bb | `----nand0.root | | `----nand0.root.bb |----eth0 |----phy0 |----ram0 |----defaultenv |----filesystem: / |----filesystem: /dev drivers: imx_serial partition smc911x miiphy nand_device imx_nand cfi_flash mem ram rom nand_bb ramfs devfs uboot:/ update_kernel nand phy0: Link is up - 100/Full host 192.168.50.247 is alive protect: Function not implemented erasing partition /dev/nand0.kernel.bb flashing uImage to /dev/nand0.kernel.bb phy0: Link is up - 100/Full TFTP from server 192.168.50.247; our IP address is 192.168.50.182 Filename 'uImage'. Loading: ####################################T ############################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1822068 (1bcd74 hex) uboot:/bootm /dev/nand0.kernel.bb Verifying Checksum ... OK Image Name: Linux-2.6.24 Created: 2009-10-20 11:06:36 UTC Data Size: 1822004 Bytes = 1.7 MB Load Address: 80008000 Entry Point: 80008000 OK commandline: console=ttymxc0 arch_number: 1673 Starting kernel ... ## Transferring control to Linux (at address 80008000) ... Uncompressing Linux............................................................. ............................................................... done, booting the kernel. ==============================================================
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot