[U-Boot] [PATCH v2 5/6] sun50i: dts: add r_pio node and pinconfig entries into r_pio and pio

[Philipp Tomsich]

To sync up with use of a pinctrl-driver, this updates the DTS.

Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---
 arch/arm/dts/sun50i-a64.dtsi | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index 24406d0..54b68e0 100644
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -376,9 +376,9 @@
                        gpio-controller;
                        #gpio-cells = <3>;
                        interrupt-controller;
-                       #interrupt-cells = <2>;
+                       #interrupt-cells = <3>;
 
-                       uart0_pins_a: uart0@0 {
+                       uart0_pins_a: uart0_pins_a {
                                allwinner,pins = "PB8", "PB9";
                                allwinner,function = "uart0";
                                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
@@ -532,10 +532,9 @@
                        reg = <0x01f02c00 0x400>;
                        interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
                        gpio-controller;
+                       #gpio-cells = <3>;
                        interrupt-controller;
                        #interrupt-cells = <3>;
-                       #size-cells = <0>;
-                       #gpio-cells = <3>;
                };
 
                ahb_rst: reset@1c202c0 {
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot