On 24/02/2017 11:15, Jagan Teki wrote: > From: Jagan Teki <ja...@amarulasolutions.com> > > Changes for v3: > - Rebase on master > - Fix checkpatch.pl Warnings > - Add IMX6_BMODE_UART macro for uart bootmode > - Remove value assignment in enum, since all enum list is order > > Changes for v3: > - Update IMX6_BMODE_* shift macros with real number instead of bitops > - %s/IMX6_BMODE_SERIAL/IMX6_BMODE_SERIAL_ROM > - Assign enums with numbers so-that it can easy to see same in RM > - Update board MAINTAINERS file with imx6ul-isiot-emmc.dts file > > Changes for v2: > - Rebase on master > - Add Is.IoT eMMC boot patches > - Add few mmc env patches on board > > Jagan Teki (15): > imx6: Add imx6_src_get_boot_mode > imx: spl: Update NAND bootmode detection bit > imx: Use IMX6_BMODE_* macros instead of numericals > imx6: Add src_base structure define macro > imx6: isiotmx6ul: Update SPL board boot order for eMMC > i.MX6UL: isiot: Add eMMC boot support > i.MX6UL: isiot: Add modeboot env via board_late_init > i.MX6UL: isiot: Add mmc_late_init > i.MX6UL: isiot: Switch the mmc env based on devno > arm: dts: imx6qdl-icore-rqs: Add eMMC node > imx6: icorem6_rqs: Update SPL board boot order for eMMC > imx6: icorem6_rqs: Add eMMC boot support > i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init > i.MX6Q: icorem6_rqs: Add mmc_late_init > i.MX6Q: isiot: Switch the mmc env based on devno > > arch/arm/dts/Makefile | 1 + > arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++++++ > arch/arm/dts/imx6ul-isiot-emmc.dts | 77 +++++++++++++++++++++ > arch/arm/imx-common/init.c | 10 +++ > arch/arm/imx-common/spl.c | 49 ++++++++------ > arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + > arch/arm/include/asm/imx-common/sys_proto.h | 47 +++++++++++++ > board/engicam/icorem6_rqs/icorem6_rqs.c | 96 +++++++++++++++++++++++++- > board/engicam/isiotmx6ul/MAINTAINERS | 2 + > board/engicam/isiotmx6ul/isiotmx6ul.c | 101 > +++++++++++++++++++++++++++- > configs/imx6dl_icore_rqs_mmc_defconfig | 1 + > configs/imx6q_icore_rqs_mmc_defconfig | 1 + > configs/imx6ul_isiot_emmc_defconfig | 40 +++++++++++ > configs/imx6ul_isiot_mmc_defconfig | 1 + > configs/imx6ul_isiot_nand_defconfig | 1 + > include/configs/imx6qdl_icore_rqs.h | 36 +++++----- > include/configs/imx6ul_isiot.h | 40 +++++------ > 17 files changed, 462 insertions(+), 65 deletions(-) > create mode 100644 arch/arm/dts/imx6ul-isiot-emmc.dts > create mode 100644 configs/imx6ul_isiot_emmc_defconfig >
Applied to u-boot-imx, thanks ! Best regards, Stefano -- Meet DENX at the Embedded World Trade Show 14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581 -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot