Hi Mario, On 22 February 2017 at 08:07, Mario Six <mario....@gdsys.cc> wrote: > From: Dirk Eibach <dirk.eib...@gdsys.cc> > > The gdsys ControlCenter Digital board is based on a Marvell Armada 38x > SOC. > > It boots from SPI-Flash but can be configured to boot from SD-card for > factory programming and testing. > > On board peripherals include: > - 2 x GbE > - Xilinx Kintex-7 FPGA connected via PCIe > - mSATA > - USB3 host > - Atmel TPM > > Signed-off-by: Dirk Eibach <dirk.eib...@gdsys.cc> > Signed-off-by: Mario Six <mario....@gdsys.cc> > --- > Changes in v3: > > * Removed gpio_request_simple function > * Removed dev_get_by_ofname function > * Removed "plain" GPIOs from the device tree
You are using uclass_get_device_by_name() on an I2C bus. Can you instead use aliases and uclass_get_device_by_seq()? There is quite a bit of getting stuff by name. Perhaps it is fine for now, but it would be better I think to have a driver associated with a DT node, which has phandles for the things it needs. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot
