Hi Tom, > On Fri, Mar 03, 2017 at 01:01:11AM +0100, Lukasz Majewski wrote: > > > Add support for "wdt disable" command necessary for disabling the > > watchdog timer. > > > > Signed-off-by: Lukasz Majewski <lu...@denx.de> > > --- > > cmd/Kconfig | 6 ++++++ > > cmd/Makefile | 2 ++ > > cmd/wdt.c | 32 ++++++++++++++++++++++++++++++++ > > include/watchdog.h | 2 ++ > > 4 files changed, 42 insertions(+) > > create mode 100644 cmd/wdt.c > > > > diff --git a/cmd/Kconfig b/cmd/Kconfig > > index e339d86..293e0bb 100644 > > --- a/cmd/Kconfig > > +++ b/cmd/Kconfig > > @@ -426,6 +426,12 @@ config CMD_REMOTEPROC > > help > > Support for Remote Processor control > > > > +config CMD_WDT > > + bool "wdt" > > + default n > > No need for default n, that is the default.
Ach... ok. > > > + help > > + Enables the "wdt" command, which is used to control a > > watchdog timer. + > > config CMD_GPIO > > bool "gpio" > > help > > diff --git a/cmd/Makefile b/cmd/Makefile > > index 9c9a9d1..4934427 100644 > > --- a/cmd/Makefile > > +++ b/cmd/Makefile > > @@ -157,6 +157,8 @@ obj-$(CONFIG_CMD_ETHSW) += ethsw.o > > # Power > > obj-$(CONFIG_CMD_PMIC) += pmic.o > > obj-$(CONFIG_CMD_REGULATOR) += regulator.o > > + > > +obj-$(CONFIG_CMD_WDT) += wdt.o > > endif # !CONFIG_SPL_BUILD > > > > obj-$(CONFIG_CMD_BLOB) += blob.o > > diff --git a/cmd/wdt.c b/cmd/wdt.c > > new file mode 100644 > > index 0000000..aeaa9c2 > > --- /dev/null > > +++ b/cmd/wdt.c > > @@ -0,0 +1,32 @@ > > +/* > > + * wdt.c -- Watchdog support command > > + * > > + * Copyright (C) 2017 > > + * Lukasz Majewski, DENX Software Engineering, lu...@denx.de. > > + * > > + * SPDX-License-Identifier: GPL-2.0+ > > + */ > > + > > +#include <common.h> > > +#include <watchdog.h> > > + > > +static int do_wdt(cmd_tbl_t *cmdtp, int flag, int argc, > > + char * const argv[]) > > +{ > > + int ret = CMD_RET_SUCCESS; > > + > > + if (argc < 2 || argc > 2) > > + return CMD_RET_USAGE; > > + > > + if (!strcmp(argv[1], "disable")) { > > + WATCHDOG_DISABLE(); > > + printf("WDT disabled\n"); > > + } > > + > > + return ret; > > +} > > + > > +U_BOOT_CMD(wdt, CONFIG_SYS_MAXARGS, 1, do_wdt, > > + "Watchdog (wdt)", > > + "disable - disable watchdog\n" > > +); > > diff --git a/include/watchdog.h b/include/watchdog.h > > index 174c894..b0716c5 100644 > > --- a/include/watchdog.h > > +++ b/include/watchdog.h > > @@ -41,8 +41,10 @@ int init_func_watchdog_reset(void); > > #define WATCHDOG_RESET bl hw_watchdog_reset > > #else > > extern void hw_watchdog_reset(void); > > + void hw_watchdog_disable(void); > > > > #define WATCHDOG_RESET hw_watchdog_reset > > + #define WATCHDOG_DISABLE hw_watchdog_disable > > #endif /* __ASSEMBLY__ */ > > #else > > /* > > Can we add other commands, enable (calling _init() or _reset(), > I'm not sure which off the top of my head) as well? OK, I will think about adding such code. > And we may want > to think how to handle that only "omap" and "xilinx_tb" support the > _disable function today. > The problem with WDT is that it is a "legacy" code, used by many boards and in many places. We do need to be careful here .... Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
pgpCnQh719cp6.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot