Hi Tom, > These particular SPL options are part of what the ROM provides, but > for compatibility with how we have previously used them, move them to > being implied by the board being selected. > > Signed-off-by: Tom Rini <tr...@konsulko.com> > --- > arch/arm/mach-omap2/am33xx/Kconfig | 3 +++ > board/ti/am335x/Kconfig | 9 --------- > 2 files changed, 3 insertions(+), 9 deletions(-) > > diff --git a/arch/arm/mach-omap2/am33xx/Kconfig > b/arch/arm/mach-omap2/am33xx/Kconfig index 5b5d3f8cec29..5adcead185de > 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig > +++ b/arch/arm/mach-omap2/am33xx/Kconfig > @@ -15,6 +15,9 @@ config TARGET_AM335X_EVM > select DM_SERIAL > select DM_GPIO > select TI_I2C_BOARD_DETECT > + imply SPL_YMODEM_SUPPORT > + imply SPL_ENV_SUPPORT > + imply SPL_WATCHDOG_SUPPORT
Are you sure that WDT is enabled by ROM by default? IIRC we must enable it explicitly in the SPL. > help > This option specifies support for the AM335x > GP and HS EVM development platforms. The AM335x > diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig > index a84e91b3dc56..97374bdc12ae 100644 > --- a/board/ti/am335x/Kconfig > +++ b/board/ti/am335x/Kconfig > @@ -1,14 +1,5 @@ > if TARGET_AM335X_EVM > > -config SPL_ENV_SUPPORT > - default y > - > -config SPL_WATCHDOG_SUPPORT > - default y > - > -config SPL_YMODEM_SUPPORT > - default y > - > config SYS_BOARD > default "am335x" > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot