On 03/05/2017 07:37 PM, Frank Kunz wrote:
Am 05.03.2017 um 18:17 schrieb Marek Vasut:
On 03/05/2017 01:54 PM, Frank Kunz wrote:
Those features are used by distro boot with efi boot.
Signed-off-by: Frank Kunz <mailingli...@kunz-im-inter.net>
---
:100644 100644 b122135690... c22b54b48d... M
configs/socfpga_de0_nano_soc_defconfig
configs/socfpga_de0_nano_soc_defconfig | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/configs/socfpga_de0_nano_soc_defconfig
b/configs/socfpga_de0_nano_soc_defconfig
index b122135690..c22b54b48d 100644
--- a/configs/socfpga_de0_nano_soc_defconfig
+++ b/configs/socfpga_de0_nano_soc_defconfig
@@ -4,11 +4,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
-CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
Is this move needed ? (no, it's not)
It is not needed, but "make savedefconfig" decided to do that. I do not
know how to overcome it.
Try git checkout -p to selectively clear bits from the changes.
Or git add -p ...
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y
@@ -21,6 +21,7 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
@@ -37,6 +38,8 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_UBI=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
CONFIG_DM_GPIO=y
@@ -59,5 +62,3 @@ CONFIG_G_DNL_MANUFACTURER="terasic"
CONFIG_G_DNL_VENDOR_NUM=0x0525
CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
CONFIG_USE_TINY_PRINTF=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2
+CC Dalon ...
Similar case here. "make savedefconfig" found that those two parameters
are already set by arch/arm/mach-socfpga/Kconfig and decided to remove
them here, I guess.
\ No newline at end of file
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
