Hi Nickey, Dne petek, 10. marec 2017 ob 03:19:44 CET je Nickey.Yang napisal(a): > Hi Jernej, > > 在 2017年03月09日 07:34, Jernej Skrabec 写道: > > Designware HDMI controller and phy are used in other SoCs as well. Split > > out platform independent code. > > > > DW HDMI has 8 bit registers but they can be represented as 32 bit > > registers as well. Add support to select access mode. > > > > EDID reading code use reading by blocks which is not supported by other > > SoCs in general. Make it more general using byte by byte approach, which > > is also used in Linux driver. > > > > Finally, not all DW HDMI controllers are accompanied with DW HDMI phy. > > Support custom phys by making controller code independent from phy code. > > > > Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net> > > --- > > I have tested this series of patches in rockchip rk3288 tinker boards. > > Tested-by: Nickey Yang <nickey.y...@rock-chips.com>
Great, thanks! Best regards, Jernej _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot