PPA is used on ls1046aqds to support sleep, hotplug feature.
Add PPA support to enable them.
Signed-off-by: Tang Yuantian <andy.t...@nxp.com>
---
board/freescale/ls1046aqds/ls1046aqds.c | 5 +++++
include/configs/ls1046aqds.h | 11 +++++++++++
2 files changed, 16 insertions(+)
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c
b/board/freescale/ls1046aqds/ls1046aqds.c
index af3f70a..470e61a 100644
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -22,6 +22,7 @@
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
#include <spl.h>
+#include <asm/arch/ppa.h>
#include "../common/vid.h"
#include "../common/qixis.h"
@@ -265,6 +266,10 @@ int board_init(void)
if (adjust_vdd(0))
printf("Warning: Adjusting core voltage failed.\n");
+#ifdef CONFIG_FSL_LS_PPA
+ ppa_init();
+#endif
+
return 0;
}
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 4b3b21e..f8f74aa 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -9,6 +9,17 @@
#include "ls1046a_common.h"
+#if defined(CONFIG_FSL_LS_PPA)
+#define CONFIG_ARMV8_PSCI
+#define CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
+#define SEC_FIRMWARE_ERET_ADDR_REVERT
+
+#define CONFIG_SYS_LS_PPA_FW_IN_XIP
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
+#define CONFIG_SYS_LS_PPA_FW_ADDR 0x60500000
+#endif
+#endif
+
#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
#define CONFIG_SYS_TEXT_BASE 0x82000000
#elif defined(CONFIG_QSPI_BOOT)
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
