PRU ethernet MAC address range is present in the
board EEPROM. Parse it and setup eth?addr
environment variables.
Signed-off-by: Roger Quadros <rog...@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvu...@ti.com>
Reviewed-by: Tom Rini <tr...@konsulko.com>
---
arch/arm/mach-keystone/Kconfig | 2 ++
board/ti/ks2_evm/board_k2g.c | 19 +++++++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index e1962c7..67f5fa0 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -15,6 +15,8 @@ config TARGET_K2L_EVM
config TARGET_K2G_EVM
bool "TI Keystone 2 Galileo EVM"
+ select BOARD_LATE_INIT
+ select TI_I2C_BOARD_DETECT
endchoice
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 40edbaa..a738dd2 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -12,6 +12,7 @@
#include <asm/arch/psc_defs.h>
#include <asm/arch/mmc_host_def.h>
#include "mux-k2g.h"
+#include "../common/board_detect.h"
#define SYS_CLK 24000000
@@ -149,6 +150,24 @@ int board_early_init_f(void)
}
#endif
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_TI_I2C_BOARD_DETECT)
+ int rc;
+
+ rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+ CONFIG_EEPROM_CHIP_ADDRESS);
+ if (rc)
+ printf("ti_i2c_eeprom_init failed %d\n", rc);
+
+ board_ti_set_ethaddr(1);
+#endif
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_SPL_BUILD
void spl_init_keystone_plls(void)
{
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
