So far CONFIG_MD5SUM would need to be set by a board's include file.
Since the command is really generic, move it over to Kconfig to allow
it to be defined by either a board's defconfig, menuconfig or some
config snippet merged via mergeconfig.sh.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
cmd/Kconfig | 14 ++++++++++++++
lib/Kconfig | 4 ++++
2 files changed, 18 insertions(+)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index ef53156..25e3b78 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -338,6 +338,20 @@ config CMD_CRC32
help
Compute CRC32.
+config CMD_MD5SUM
+ bool "md5sum"
+ default n
+ select MD5
+ help
+ Compute MD5 checksum.
+
+config MD5SUM_VERFIY
+ bool "md5sum -v"
+ default n
+ depends on CMD_MD5SUM
+ help
+ Add -v option to verify data against an MD5 checksum.
+
config LOOPW
bool "loopw"
help
diff --git a/lib/Kconfig b/lib/Kconfig
index b16062f..65c0157 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -101,6 +101,10 @@ config SHA_PROG_HW_ACCEL
SHA1/SHA256 progressive hashing.
Data can be streamed in a block at a time and the hashing
is performed in hardware.
+
+config MD5
+ bool
+
endmenu
menu "Compression Support"
--
2.8.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
