On Wed, Mar 22, 2017 at 7:27 PM, Tom Rini <tr...@konsulko.com> wrote: > On Wed, Mar 22, 2017 at 05:07:02PM -0500, Adam Ford wrote: > >> Logic PD has an i.MX6Q system on module (SOM) with a development kit. >> This have been verified to boot the i.MX6Q version over either SD >> on the development kit or NAND built into the SOM. >>
[snip] > >> + "fdt_high=0xffffffff\0" \ >> + "initrd_high=0xffffffff\0" \ > > I'm really really not a fan of disabling these relocations, please use > bootm_size to tell U-Boot where to make sure everything resides without > overlap. Also, distro boot? If I remove "initrd_high" then the booting with a RAM Disk fails even when I define bootm_size. I have looked at several i.MX6 boards, and it seems like the ones with RAM Disk options have this parameter. I am sure what distro boot is. Can you elaborate? > > [snip] >> +# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:4m(uboot)," \ >> + "1m(env),8m(kernel),1m(dtb),-(fs)" > > Are you really sure all of these sizes are what you can live with for a > long long time? That kernel size feels small. I defined the kernel to 8m based on the vast majority of the other i.MX6 boards, but I can see your point. I think I will just aim high and go for 16. This has plenty of NAND. > > Thanks! > Thank you for the feedback. adam > -- > Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
