On 03/29/2017 07:21 AM, Ruchika Gupta wrote: > From: Vinitha Pillai-B57223 <vinitha.pil...@nxp.com> > > - Add SD secure boot target for ls1046ardb. > - Implement board specific spl_board_init() to setup CAAM stream ID and > corresponding stream ID in SMMU. > - Change the u-boot size defined by a macro for copying the main U-Boot by SPL > to also include the u-boot Secure Boot header size as header is appended to > u-boot image. So header will also be copied from SD to DDR. > - CONFIG_MAX_SPL_SIZE is limited to 90K.SPL is copied to OCRAM (128K) where > 32K > are reserved for use by boot ROM and 6K for the header > - Reduce the size of CAAM driver for SPL. Since the size of spl image > was about 94K, Blobification functions and descriptors, that are not > required > at the time of SPL are disabled. Further error code conversion to strings > is disabled for SPL build. This reduces the spl image size to 92K. > > Signed-off-by: Vinitha Pillai <vinitha.pil...@nxp.com> > Signed-off-by: Sumit Garg <sumit.g...@nxp.com> > Signed-off-by: Ruchika Gupta <ruchika.gu...@nxp.com> > --- > Changes from v1: > - Rebased patches to latest dependent patch set > - With the dependent path set , spl imag size increased to 94K. So > - additionally reduce the spl image size by removing the functions from > - CAAM driver that are not required in SPL flow > > Dependent patch set: > SECURE boot target addition for NOR on LS1043, LS1046 > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F742548%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=fe9EEogXl1g%2B%2BTITuTSqQfl9RysiRwi1SStWOebmidU%3D&reserved=0 > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F742552%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=eujlNAJ5%2BixRVB8z0DBFVUg0xN%2BkZT63E7rbvZQud5w%3D&reserved=0 > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F742549%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=ANaXQxRKJAEjl3fSePjTUGDEy3%2F4CmU%2F3f%2B0qc8YB4A%3D&reserved=0 > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F742551%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=dKX1JhIHPq3RHHXOwHeoQcht%2BiHDJTEzDSSbctgiXGE%3D&reserved=0 > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F742550%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=aZvIbu32SBljIcR8DP4afhwsBrfSCWOqgx61wf3JBZk%3D&reserved=0 > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F742553%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=fVKS2M58picc3ky05%2FTL9fd2NvZ7KDGPUy1D5TGsm20%3D&reserved=0 > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F742554%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=CcKSSyrYvAJJG1fGPZI3lt6huuD995X8vCuidwmG0fc%3D&reserved=0 > > and > SPL size reduction patches > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F744755%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=%2FAP98FyGhu04QqKAOAM0Oxeq3ZnT1rYDuUNw%2F4W9KlU%3D&reserved=0 > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F744756%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C9ac07c8775234e16d80308d476aedabb%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=mxS6n30GD7iPNStd8ieHeFjcEdXhKc9S33iLZbCJfMo%3D&reserved=0 > > > arch/arm/include/asm/fsl_secure_boot.h | 2 +- > board/freescale/ls1046ardb/ls1046ardb.c | 19 +++++++++++ > configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 45 > +++++++++++++++++++++++++ > drivers/crypto/fsl/jobdesc.c | 4 +-- > drivers/crypto/fsl/jr.c | 19 ++++++----- > include/configs/ls1046a_common.h | 17 ++++++++-- > 6 files changed, 91 insertions(+), 15 deletions(-) > create mode 100644 configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig >
This patch causes compiling error for T1042RDB_PI_NAND_SECURE_BOOT. Please check. drivers/crypto/fsl/fsl_blob.c:28: undefined reference to `inline_cnstr_jobdesc_blob_decap' York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot