Hi Marcel, On 24 March 2017 at 18:18, Marcel Ziswiler <mar...@ziswiler.com> wrote: > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > This patch adds board support for the Toradex Apalis TK1 a computer on > module which can be used on different carrier boards. > > The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L > RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor > chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. > Furthermore, there is a Kinetis MK20DN512 companion micro controller for > analogue, CAN and resistive touch functionality. > > For the sake of ease of use we do not distinguish between different > carrier boards for now as the base module features are deemed > sufficient enough for regular booting. > > The following functionality is working so far: > - eMMC boot, environment storage and Toradex factory config block > - Gigabit Ethernet > - MMC/SD cards (both MMC1 as well as SD1 slot) > - USB client/host (dual role OTG port as client e.g. for DFU/UMS or host, > other two ports as host) > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > Reviewed-by: Simon Glass <s...@chromium.org> > > Signed-off-by: Marcel Ziswiler <mar...@ziswiler.com> > --- > > Changes in v5: > - Re-enabled EFI loader support after discussion with Alexander.
Well OK, either way is fine with me. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot