OMAP-L138 LCDK board does not have a SPI flash.
Remove spiboot related environment variable
definitions.
Signed-off-by: Sekhar Nori <nsek...@ti.com>
---
include/configs/omapl138_lcdk.h | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 6700073aa203..f6aca0482527 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -264,9 +264,7 @@
#define CONFIG_BOOTARGS "console=ttyS2,115200n8
root=/dev/mmcblk0p2 rw rootwait ip=off"
#define CONFIG_BOOTCOMMAND \
"if mmc rescan; then " \
- "run mmcboot; " \
- "else " \
- "run spiboot; " \
+ "run mmcboot; "
"fi"
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdtaddr=0xc0600000\0" \
@@ -280,11 +278,7 @@
__stringify(CONFIG_BOOTFILE) "; " \
"fatload mmc 0 ${fdtaddr} ${fdtfile}; " \
"run fdtboot; " \
- "fi;\0" \
- "spiboot=" \
- "sf probe 0; " \
- "sf read 0xc0700000 0x80000 0x220000; " \
- "bootz 0xc0700000;\0"
+ "fi;\0"
/*
* U-Boot commands
--
2.9.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
