On Sat, Apr 1, 2017 at 12:22 PM, Simon Glass <s...@chromium.org> wrote: > +Bin > > Hi, > > On 26 March 2017 at 05:48, Andy Shevchenko > <andriy.shevche...@linux.intel.com> wrote: >> On Mon, 2017-03-13 at 16:09 +0200, Andy Shevchenko wrote: >>> On Fri, Mar 3, 2017 at 12:31 PM, Kever Yang <kever.y...@rock-chips.com >>> > wrote: >>> > On 02/28/2017 08:04 PM, Andy Shevchenko wrote: >>> > > >>> > > Add a specific serial driver for Intel MID platforms. >>> > > >>> > > It has special fractional divider which can be programmed via >>> > > UART_PS, >>> > > UART_MUL, and UART_DIV registers. >>> > > >>> > > The UART clock is calculated as >>> > > >>> > > UART clock = XTAL * UART_MUL / UART_DIV >>> > > >>> > > The baudrate is calculated as >>> > > >>> > > baud rate = UART clock / UART_PS / DLAB >>> > > >>> > > Initialize fractional divider correctly for Intel Edison platform. >>> > > >>> > > For backward compatibility we have to set initial DLAB value to 16 >>> > > and speed to 115200 baud, where initial frequency is 29491200Hz, >>> > > and >>> > > XTAL frequency is 38.4MHz. >>> > Reviewed-by: Kever Yang <kever.y...@rock-chips.com> >>> >>> Thanks! >>> >>> Tom et all, is it forgotten? >> >> Any update on this? Should I do something about? > > Probably Bin can apply it - it's a good idea to cc him on x86 stuff. > If not let me know and I can pull it in via DM. >
applied to u-boot-x86, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot