I tryed to remove it but the result was the same. I have another straing problem: if i enable the macro #define DEBUG in my mx6board.h the system stuck
U-Boot 2016.07 (Apr 11 2017 - 11:19:23 +0200) initcall: 1780b930 U-Boot code: 17800000 -> 17847A3C BSS: -> 178928E8 initcall: 17801cb4 CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C)malloc_simple: size=10, ptr=ec, limit=400: 93fbdc uclass_find_device_by_seq: 0 -1 uclass_find_device_by_seq: 0 0 - -1 -1 - not found at 27C Reset cause: POR initcall: 1780be60 Board: i.MX6Q SIBIRI Support: http://www.infomob.it/ initcall: 1780b974 I2C: ready initcall: 1780b95c DRAM: initcall: 17802db0 gd->ram_size: 1073741824 initcall: 17802dd8 DRAM test not implemented! initcall: 1780bbb4 Monitor len: 000928E8 Ram size: 40000000 Ram top: 50000000 initcall: 1780b75c initcall: 1780b8d8 TLB table from 4fff0000 to 4fff4000 initcall: 1780b774 initcall: 1780b88c Reserving 586k for U-Boot at: 4ff5d000 initcall: 1780b85c Reserving 10248k for malloc() at: 4f55b000 initcall: 1780ba8c Reserving 80 Bytes for Board Info at: 4f55afb0 initcall: 1780b77c initcall: 1780b828 Reserving 248 Bytes for Global Data at: 4f55aeb8 initcall: 1780b7c4 initcall: 1780b798 initcall: 1780bc34 initcall: 1780bb8c initcall: 1780bae4 RAM Configuration: Bank #0: 10000000 1 GiB DRAM: 1 GiB initcall: 1780b7a8 New Stack Pointer is: 4f55ae90 initcall: 1780ba50 initcall: 1780b9e4 Relocation Offset is: 3875d000 Relocating to 4ff5d000, new gd at 4f55aeb8, sp at 4f55ae90 initcall: 4ff68c80 initcall: 4ff68c88 Could it be a problem of ram configuration? Thanks ------------------------------ *Ing. Fausto Sessego* *R&D Hardware & Software Engineer* info mob > *Tecnologie Wireless per la logistica e la sicurezza* <http://www.infomob.it> *a:* Parco scientifico e tecnologico della Sardegna, Edificio 1 Loc. Piscinamanna - 09010 Pula (CA) <https://www.google.it/maps/place/Sardegna+Ricerche/@38.9899811,8.9280376,17z/data=!3m1!4b1!4m2!3m1!1s0x12e7274e0b4c4191:0x1a9e7f06456bbd3> *p:* +39 070 92432952 *e:* fausto.sess...@infomob.it *w:* www.infomob.it 2017-04-10 22:14 GMT+02:00 Fabio Estevam <feste...@gmail.com>: > On Mon, Apr 10, 2017 at 5:07 PM, Fausto Sessego > <fausto.sess...@infomob.it> wrote: > > It is right because it is a custom board designed by my self. > > > > I renamed CONFIG_TARGET_MX6BOARD=y > > > > Do you have any hint? > > You can try removing the line ""mmcbooterror=echo Boot from mmc > ERROR!!; " from your CONFIG_EXTRA_ENV_SETTINGS. > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot