On 04/11/2017 02:16 AM, Shengzhou Liu wrote:
-----Original Message-----
From: York Sun [mailto:york....@nxp.com]
Sent: Tuesday, April 11, 2017 1:14 AM
To: Shengzhou Liu <shengzhou....@nxp.com>; u-boot@lists.denx.de
Subject: Re: [PATCH] board/t1024rdb: enable board-level reset when issuing
reset command
On 04/10/2017 01:14 AM, Shengzhou Liu wrote:
As board-specific reset logic, it needs to issue reset signal via CPLD
when issuing 'reset' command in u-boot, this patch solves the issue of
reset command not working on T1024RDB.
Shengzhou,
Doesn't the RST_REQ signal work for this board?
York
York,
Yes, RST_REQ can't reliably work without CPLD reset on T1024RDB, it needs a
board-level reset via CPLD reset logic.
Why? Isn't it a hardware problem? If this is something cannot be fixed,
we can add this as a software workaround. Let's make it clear.
York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
