[U-Boot] [PATCH] rockchip: rk3399: use regulators_enable_boot_on() to init regulator

[Kever Yang]

Use regulators_enable_boot_on() instead of init regulators one by one,
the interface can init all the regulators with regulator-boot-on property.

Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---

 board/rockchip/evb_rk3399/evb-rk3399.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c 
b/board/rockchip/evb_rk3399/evb-rk3399.c
index c437f1b..2ebdee7 100644
--- a/board/rockchip/evb_rk3399/evb-rk3399.c
+++ b/board/rockchip/evb_rk3399/evb-rk3399.c
@@ -40,10 +40,9 @@ int board_init(void)
                goto out;
        }
 
-       /* rk3399 need init vdd_center to get correct output voltage */
-       ret = regulator_get_by_platname("vdd_center", &regulator);
+       ret = regulators_enable_boot_on(false);
        if (ret)
-               debug("%s: Cannot get vdd_center regulator\n", __func__);
+               debug("%s: Cannot enable boot on regulator\n", __func__);
 
        ret = regulator_get_by_platname("vcc5v0_host", &regulator);
        if (ret) {
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot