Hi Heinrich, On 04/14/2017 07:26 PM, Heinrich Schuchardt wrote: > This patch series is a resubmission of the v6 patch series > https://lists.denx.de/pipermail/u-boot/2017-February/281941.html > by Heiner Kallweit. > > Patch 1 updates the device tree to a recent Linux version. > Patch 2 add a MMC driver for the GXBB SOC > Both patches are unchanged relative to version 6 of the patch series. > Patch 3 enables the MMC driver in the Odroid C2 default configuration. > This patch had to be rearranged to become applicable again. > Patch 4 enables MMC as a boot target for the Odroid C2. > This patch is new. > > I have tested the patch series against U-Boot v2017.3 and U-Boot master.
Confusing..what patches are correct.. 2017-04-12 20:32 Heiner Kallweit * odroid-c2: enable new Meson GX MMC driver in board defconfig 2017-04-12 20:30 Carlo Caione * mmc: meson: add MMC driver for Meson GX (S905) 2017-04-12 20:28 Heiner Kallweit * arm: dts: update Meson GXBB / Odroid-C2 DT with recent Linux version I have already applied to u-boot-mmc for [PATCH v7 1/3]~[PATCH v7 3/3]. And why this patchset is v7? And i did PR to Tom.. Let me know what is correct..otherwise you will send the patch without applying patches. Best Regards, Jaehoon Chung > > Signed-off-by: Heinrich Schuchardt <xypron.g...@gmx.de> > > Heiner Kallweit (2): > mmc: meson: add MMC driver for Meson GX (S905) > arm: dts: update Meson GXBB / Odroid-C2 DT with latest Linux version > > Heinrich Schuchardt (2): > Enable new Meson GX MMC driver in Odroid C2 defconfig. > odroid-c2: enable MMC as boot target > > arch/arm/dts/meson-gxbb-odroidc2.dts | 147 ++++++- > arch/arm/dts/meson-gxbb.dtsi | 718 > ++++++++++++++++++++++------------- > configs/odroid-c2_defconfig | 5 +- > drivers/mmc/Kconfig | 6 + > drivers/mmc/Makefile | 1 + > include/configs/meson-gxbb-common.h | 2 + > 6 files changed, 603 insertions(+), 276 deletions(-) > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
