Am 14.04.2017 um 10:24 schrieb Heiner Kallweit:
> In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot
> was assigned dev number 1 (0 is the SD slot). So on uboot prompt
U-Boot
> we had to manually switch the mmc device first. Therefore change the
> device number assignment.
Objection, this differs from Linux and will be overwritten on next dts sync.
Regards,
Andreas
>
> Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
> ---
> arch/arm/dts/meson-gxbb-odroidc2.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts
> b/arch/arm/dts/meson-gxbb-odroidc2.dts
> index c737183..5ec67ca 100644
> --- a/arch/arm/dts/meson-gxbb-odroidc2.dts
> +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
> @@ -53,6 +53,8 @@
>
> aliases {
> serial0 = &uart_AO;
> + mmc0 = &sd_emmc_c;
> + mmc1 = &sd_emmc_b;
> };
>
> chosen {
>
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
