On 2017-04-12, Tom Rini wrote: > We also need to start setting bootm_size. Quoting myself from > include/configs/ti_armv7_common.h: > /* > * We setup defaults based on constraints from the Linux kernel, which should > * also be safe elsewhere. We have the default load at 32MB into DDR (for > * the kernel), FDT above 128MB (the maximum location for the end of the > * kernel), and the ramdisk 512KB above that (allowing for hopefully never > * seen large trees). We say all of this must be within the first 256MB > * as that will normally be within the kernel lowmem and thus visible via > * bootm_size and we only run on platforms with 256MB or more of memory. > */ > ... > "bootm_size=0x10000000\0" \
I mostly add the variables defined in doc/README.distro for boards I'm adding distro_bootcmd support to, and there's no mention of bootm_size there. Are there other places that it would make more sense to document or add documentation for this variable setting? Does bootm_size impact bootz/booti as well, or is it just used with bootm? live well, vagrant
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot