Add an implementation of the ds1307 driver that uses the driver model
i2c APIs.

Signed-off-by: Chris Packham <judge.pack...@gmail.com>

---

 drivers/rtc/Kconfig  |   7 ++
 drivers/rtc/ds1307.c | 196 ++++++++++++++++++++++++++++++++++++++++++++++-----
 2 files changed, 184 insertions(+), 19 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cb79a01..d06130c7 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -23,4 +23,11 @@ config RTC_PCF2127
          has a selectable I2C-bus or SPI-bus, a backup battery switch-over 
circuit, a
          programmable watchdog function, a timestamp function, and many other 
features.
 
+config RTC_DS1307
+       bool "Enable DS1307 driver"
+       depends on DM_RTC
+       help
+         Support for Dallas Semiconductor (now Maxim) DS1307 and DS1338/9 and
+         compatible Real Time Clock devices.
+
 endmenu
diff --git a/drivers/rtc/ds1307.c b/drivers/rtc/ds1307.c
index 3be1da6..68d1b65 100644
--- a/drivers/rtc/ds1307.c
+++ b/drivers/rtc/ds1307.c
@@ -16,29 +16,12 @@
 
 #include <common.h>
 #include <command.h>
+#include <dm.h>
 #include <rtc.h>
 #include <i2c.h>
 
 #if defined(CONFIG_CMD_DATE)
 
-/*---------------------------------------------------------------------*/
-#undef DEBUG_RTC
-
-#ifdef DEBUG_RTC
-#define DEBUGR(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGR(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-#ifndef CONFIG_SYS_I2C_RTC_ADDR
-# define CONFIG_SYS_I2C_RTC_ADDR       0x68
-#endif
-
-#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
-# error The DS1307 is specified only up to 100kHz!
-#endif
-
 /*
  * RTC register addresses
  */
@@ -62,6 +45,26 @@
 #define MCP7941X_BIT_ST                0x80
 #define MCP7941X_BIT_VBATEN    0x08
 
+#ifndef CONFIG_DM_RTC
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_RTC
+
+#ifdef DEBUG_RTC
+#define DEBUGR(fmt, args...) printf(fmt, ##args)
+#else
+#define DEBUGR(fmt, args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR       0x68
+#endif
+
+#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
+# error The DS1307 is specified only up to 100kHz!
+#endif
+
 static uchar rtc_read (uchar reg);
 static void rtc_write (uchar reg, uchar val);
 
@@ -211,4 +214,159 @@ static void rtc_write (uchar reg, uchar val)
 {
        i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
-#endif
+
+#else
+static int ds1307_rtc_set(struct udevice *dev, const struct rtc_time *tm)
+{
+       int ret;
+       uchar buf[7];
+
+       debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+             tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+             tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+       if (tm->tm_year < 1970 || tm->tm_year > 2069)
+               printf("WARNING: year should be between 1970 and 2069!\n");
+
+       buf[RTC_YR_REG_ADDR] = bin2bcd(tm->tm_year % 100);
+       buf[RTC_MON_REG_ADDR] = bin2bcd(tm->tm_mon);
+       buf[RTC_DAY_REG_ADDR] = bin2bcd(tm->tm_wday + 1);
+       buf[RTC_DATE_REG_ADDR] = bin2bcd(tm->tm_mday);
+       buf[RTC_HR_REG_ADDR] = bin2bcd(tm->tm_hour);
+       buf[RTC_MIN_REG_ADDR] = bin2bcd(tm->tm_min);
+       buf[RTC_SEC_REG_ADDR] = bin2bcd(tm->tm_sec);
+
+       if (of_device_is_compatible(dev, "microchip,mcp7941x")) {
+               buf[RTC_DAY_REG_ADDR] |= MCP7941X_BIT_VBATEN;
+               buf[RTC_SEC_REG_ADDR] |= MCP7941X_BIT_ST;
+       }
+
+       ret = dm_i2c_write(dev, 0, buf, sizeof(buf));
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
+
+static int ds1307_rtc_get(struct udevice *dev, struct rtc_time *tm)
+{
+       int ret;
+       uchar buf[7];
+
+read_rtc:
+       ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
+       if (ret < 0)
+               return ret;
+
+       if (of_device_is_compatible(dev, "dallas,ds1307")) {
+               if (buf[RTC_SEC_REG_ADDR] & RTC_SEC_BIT_CH) {
+                       printf("### Warning: RTC oscillator has stopped\n");
+                       /* clear the CH flag */
+                       buf[RTC_SEC_REG_ADDR] &= ~RTC_SEC_BIT_CH;
+                       dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR,
+                                        buf[RTC_SEC_REG_ADDR]);
+                       return -1;
+               }
+       }
+
+       if (of_device_is_compatible(dev, "dallas,mcp7941x")) {
+               /* make sure that the backup battery is enabled */
+               if (!(buf[RTC_DAY_REG_ADDR] & MCP7941X_BIT_VBATEN)) {
+                       dm_i2c_reg_write(dev, RTC_DAY_REG_ADDR,
+                                        buf[RTC_DAY_REG_ADDR] |
+                                        MCP7941X_BIT_VBATEN);
+               }
+
+               /* clock halted?  turn it on, so clock can tick. */
+               if (!(buf[RTC_SEC_REG_ADDR] & MCP7941X_BIT_ST)) {
+                       dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR,
+                                        MCP7941X_BIT_ST);
+                       printf("Started RTC\n");
+                       goto read_rtc;
+               }
+       }
+
+       tm->tm_sec  = bcd2bin(buf[RTC_SEC_REG_ADDR] & 0x7F);
+       tm->tm_min  = bcd2bin(buf[RTC_MIN_REG_ADDR] & 0x7F);
+       tm->tm_hour = bcd2bin(buf[RTC_HR_REG_ADDR] & 0x3F);
+       tm->tm_mday = bcd2bin(buf[RTC_DATE_REG_ADDR] & 0x3F);
+       tm->tm_mon  = bcd2bin(buf[RTC_MON_REG_ADDR] & 0x1F);
+       tm->tm_year = bcd2bin(buf[RTC_YR_REG_ADDR]) +
+                             (bcd2bin(buf[RTC_YR_REG_ADDR]) >= 70 ?
+                              1900 : 2000);
+       tm->tm_wday = bcd2bin((buf[RTC_DAY_REG_ADDR] - 1) & 0x07);
+       tm->tm_yday = 0;
+       tm->tm_isdst = 0;
+
+       debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+             tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+             tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+       return 0;
+}
+
+static int ds1307_rtc_reset(struct udevice *dev)
+{
+       int ret;
+       struct rtc_time tmp = {
+               .tm_year = 1970,
+               .tm_mon = 1,
+               .tm_mday = 1,
+               .tm_hour = 0,
+               .tm_min = 0,
+               .tm_sec = 0,
+       };
+
+       /* clear Clock Halt */
+       ret = dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR, 0x00);
+       if (ret < 0)
+               return ret;
+       ret = dm_i2c_reg_write(dev, RTC_CTL_REG_ADDR,
+                              RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 |
+                              RTC_CTL_BIT_RS0);
+       if (ret < 0)
+               return ret;
+
+       ret = ds1307_rtc_set(dev, &tmp);
+       if (ret < 0)
+               return ret;
+
+       debug("RTC:   %4d-%02d-%02d %2d:%02d:%02d UTC\n",
+             tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
+             tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
+
+       return 0;
+}
+
+static int ds1307_probe(struct udevice *dev)
+{
+       i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
+                          DM_I2C_CHIP_WR_ADDRESS);
+
+       return 0;
+}
+
+static const struct rtc_ops ds1307_rtc_ops = {
+       .get = ds1307_rtc_get,
+       .set = ds1307_rtc_set,
+       .reset = ds1307_rtc_reset,
+};
+
+static const struct udevice_id ds1307_rtc_ids[] = {
+       { .compatible = "dallas,ds1307" },
+       { .compatible = "dallas,ds1337" },
+       { .compatible = "dallas,ds1340" },
+       { .compatible = "microchip,mcp7941x" },
+       { }
+};
+
+U_BOOT_DRIVER(rtc_ds1307) = {
+       .name   = "rtc-ds1307",
+       .id     = UCLASS_RTC,
+       .probe  = ds1307_probe,
+       .of_match = ds1307_rtc_ids,
+       .ops    = &ds1307_rtc_ops,
+};
+#endif /* CONFIG_DM_RTC */
+
+#endif /* CONFIG_CMD_DATE*/
-- 
2.10.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to