From: Stefan Roese <s...@denx.de>
This patch fixes the following:
1. KR/SFI on lane #4 mux selector is 0x2 and not 0x1
2. Comment typo
Change-Id: I1e628576dc483697e454408463a34dac13ba277c
Signed-off-by: Rabeeh Khoury <rab...@solid-run.com>
Signed-off-by: Stefan Roese <s...@denx.de>
Signed-off-by: Igal Liberman <ig...@marvell.com>
---
drivers/phy/marvell/comphy_cp110.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/marvell/comphy_cp110.c
b/drivers/phy/marvell/comphy_cp110.c
index 499aa68..e90a913 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -49,7 +49,7 @@ struct comphy_mux_data cp110_comphy_phy_mux_data[] = {
{PHY_TYPE_SFI, 0x1}, {PHY_TYPE_XAUI1, 0x1},
{PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SATA1, 0x4} } },
{7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */
- {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_SFI, 0x1},
+ {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_SFI, 0x2},
{PHY_TYPE_SGMII2, 0x1}, {PHY_TYPE_XAUI2, 0x1} } },
{6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_XAUI1, 0x1}, /* Lane 5 */
{PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SGMII3, 0x1},
@@ -1718,7 +1718,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config
*ptr_chip_cfg,
}
if (ret == 0) {
/*
- * If interface wans't initialiuzed, set the lane to
+ * If interface wans't initialized, set the lane to
* PHY_TYPE_UNCONNECTED state.
*/
ptr_comphy_map->type = PHY_TYPE_UNCONNECTED;
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
