QSPI-boot is verified on LS20080ARDB RevF board
with LS2088A SoC.
LS2088ARDB RevF Board has limitation that QIXIS
can not be access, so QIXIS flag is kept disabled
Signed-off-by: Priyanka Jain <priyanka.j...@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gu...@nxp.com>
---
Changes for v4: Updated copyright
Changes for v3: Updated README
Changes for v2: Incorporated Sun York's comments
Introduced another patch to update qixis related code
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 +
arch/arm/dts/Makefile | 2 +-
arch/arm/dts/fsl-ls2080a-rdb-qspi.dts | 57 +++++++++++++++++++++++++++++
board/freescale/ls2080ardb/README | 26 +++++++++++++
configs/ls2080ardb_qspi_defconfig | 40 ++++++++++++++++++++
include/configs/ls2080a_common.h | 7 ++++
include/configs/ls2080aqds.h | 9 +----
include/configs/ls2080ardb.h | 53 +++++++++++++++++++++++++--
8 files changed, 184 insertions(+), 11 deletions(-)
create mode 100644 arch/arm/dts/fsl-ls2080a-rdb-qspi.dts
create mode 100644 configs/ls2080ardb_qspi_defconfig
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 12fd80e..4b32b2e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -163,6 +163,7 @@ endchoice
config SYS_LS_PPA_FW_ADDR
hex "Address of PPA firmware loading from"
depends on FSL_LS_PPA
+ default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
default 0x60500000 if SYS_LS_PPA_FW_IN_XIP
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0ee4281..59366cf 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -171,7 +171,7 @@ dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
ls1021a-iot-duart.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
- fsl-ls2080a-rdb.dtb
+ fsl-ls2080a-rdb.dtb fsl-ls2080a-rdb-qspi.dtb
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \
diff --git a/arch/arm/dts/fsl-ls2080a-rdb-qspi.dts
b/arch/arm/dts/fsl-ls2080a-rdb-qspi.dts
new file mode 100644
index 0000000..aa9b03d
--- /dev/null
+++ b/arch/arm/dts/fsl-ls2080a-rdb-qspi.dts
@@ -0,0 +1,57 @@
+/*
+ * NXP ls2080a RDB board device tree source for QSPI-boot
+ *
+ * Copyright (C) 2017 NXP Semiconductors
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2080a RDB Board";
+ compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+ aliases {
+ spi0 = &qspi;
+ spi1 = &dspi;
+ };
+};
+
+&dspi {
+ bus-num = <0>;
+ status = "okay";
+
+ dflash0: n25q512a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+};
diff --git a/board/freescale/ls2080ardb/README
b/board/freescale/ls2080ardb/README
index 0c9c574..c870adc 100644
--- a/board/freescale/ls2080ardb/README
+++ b/board/freescale/ls2080ardb/README
@@ -43,6 +43,7 @@ Memory map from core's view
0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
0x00_1800_0000 .. 0x00_181F_FFFF OCRAM
+0x00_2000_0000 .. 0x00_2FFF_FFFF QSPI region #1
0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
@@ -68,6 +69,31 @@ Booting Options
---------------
a) NOR boot
b) NAND boot
+c) QSPI boot
+
+cfg_rcw_src switches needs to be changed for booting from different option.
+Refer to board documentation for correct switch setting.
+
+QSPI boot details
+===================
+Supported only for
+ LS2080/LS2088ARDB RevF board with LS2088A SoC.
+
+Images needs to be copied to QSPI flash
+as per memory map given below.
+
+Memory map for QSPI flash
+-------------------------
+Image Flash Offset
+RCW+PBI 0x00000000
+Boot firmware (U-Boot) 0x00100000
+Boot firmware Environment 0x00300000
+PPA firmware 0x00400000
+Cortina PHY firmware 0x00980000
+DPAA2 MC 0x00A00000
+DPAA2 DPL 0x00D00000
+DPAA2 DPC 0x00E00000
+Kernel.itb 0x01100000
Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
-------------------------------------------------------------------
diff --git a/configs/ls2080ardb_qspi_defconfig
b/configs/ls2080ardb_qspi_defconfig
new file mode 100644
index 0000000..d89c724
--- /dev/null
+++ b/configs/ls2080ardb_qspi_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080ARDB=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb-qspi"
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 427f623..e24ea29 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (C) 2017 NXP Semiconductors
* Copyright (C) 2014 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
@@ -28,6 +29,12 @@
#else
#define CONFIG_SYS_TEXT_BASE 0x30100000
#endif
+#else
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
#endif
#define CONFIG_SUPPORT_RAW_INITRD
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index beacb99..021a740 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (C) 2017 NXP Semiconductors
* Copyright 2015 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
@@ -262,13 +263,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
-#if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_TEXT_BASE 0x20010000
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
-#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#else
+#ifndef CONFIG_QSPI_BOOT
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE +
0x200000)
#define CONFIG_ENV_SECT_SIZE 0x20000
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 2155a89..6742816 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -1,4 +1,5 @@
/*
+ * Copyright (C) 2017 NXP Semiconductors
* Copyright 2015 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
@@ -12,6 +13,12 @@
#undef CONFIG_CONS_INDEX
#define CONFIG_CONS_INDEX 2
+#ifdef CONFIG_FSL_QSPI
+#undef CONFIG_CMD_IMLS
+#define CONFIG_SYS_I2C_EARLY_INIT
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+#endif
+
#define I2C_MUX_CH_VOL_MONITOR 0xa
#define I2C_VOL_MONITOR_ADDR 0x38
#define CONFIG_VOL_MONITOR_IR36021_READ
@@ -69,6 +76,7 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
+#ifndef CONFIG_FSL_QSPI
/* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
@@ -157,7 +165,6 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
-
#define CONFIG_FSL_QIXIS /* use common QIXIS code */
#define QIXIS_LBMAP_SWITCH 0x06
#define QIXIS_LBMAP_MASK 0x0f
@@ -250,7 +257,7 @@ unsigned long get_board_sys_clk(void);
/* Debug Server firmware */
#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
-
+#endif
#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
/*
@@ -263,11 +270,18 @@ unsigned long get_board_sys_clk(void);
#define I2C_MUX_CH_DEFAULT 0x8
/* SPI */
-#ifdef CONFIG_FSL_DSPI
+#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_BAR
+#ifdef CONFIG_FSL_DSPI
#define CONFIG_SPI_FLASH_STMICRO
#endif
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE (1 << 26) /* 64MB */
+#define FSL_QSPI_FLASH_NUM 2
+#endif
+#endif
/*
* RTC configuration
@@ -347,6 +361,27 @@ unsigned long get_board_sys_clk(void);
" 0x580800000 \0" \
BOOTENV
#else
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "scriptaddr=0x80800000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "pxefile_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x88000000\0" \
+ "ramdisk_addr_r=0x89000000\0" \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x21100000\0" \
+ "mcmemsize=0x40000000\0" \
+ "fdtfile=fsl-ls2080a-rdb.dtb\0" \
+ "mcinitcmd=fsl_mc start mc 0x20a00000" \
+ " 0x20e00000 \0" \
+ BOOTENV
+#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"scriptaddr=0x80800000\0" \
@@ -369,6 +404,7 @@ unsigned long get_board_sys_clk(void);
" 0x580800000 \0" \
BOOTENV
#endif
+#endif
#undef CONFIG_BOOTARGS
@@ -378,11 +414,18 @@ unsigned long get_board_sys_clk(void);
" hugepagesz=2m hugepages=256"
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_QSPI_BOOT
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \
+ " && bootm $kernel_start" \
+ " || run distro_bootcmd"
+#else
/* Try to boot an on-NOR kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000"
\
" && cp.b $kernel_start $kernel_load $kernel_size" \
" && bootm $kernel_load" \
" || run distro_bootcmd"
+#endif
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
@@ -391,7 +434,11 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_PHY_CORTINA
#define CONFIG_PHYLIB
#define CONFIG_SYS_CORTINA_FW_IN_NOR
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_CORTINA_FW_ADDR 0x20980000
+#else
#define CONFIG_CORTINA_FW_ADDR 0x581000000
+#endif
#define CONFIG_CORTINA_FW_LENGTH 0x40000
#define CORTINA_PHY_ADDR1 0x10
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
