2017-04-25 17:48 GMT+02:00 Álvaro Fernández Rojas <nolt...@gmail.com>: > I've just realized I sent this without v2 prefix. > Should I resend it?
no, I've found the right patches in patchwork ;) > > El 24/04/2017 a las 19:03, Álvaro Fernández Rojas escribió: >> All MIPS boards that support debug uart are calling debug_uart_init right at >> the beginning of board_early_init_f. >> Instead of doing that, let's provide a generic call to debug_uart_init right >> before the call to board_init_f if debug uart is enabled. >> >> v2: Introduce the changes suggested by Daniel Schwierzeck: >> - Call debug_uart_init before low level init for boards with stack in SRAM. >> >> Daniel Schwierzeck (1): >> MIPS: call debug_uart_init right before board_init_f >> >> Álvaro Fernández Rojas (3): >> MIPS: QCA AP121: remove debug_uart_init call >> MIPS: QCA AP143: remove debug_uart_init call >> MIPS: tl-wdr4300: remove debug_uart_init call >> >> arch/mips/cpu/start.S | 14 ++++++++++++++ >> board/qca/ap121/ap121.c | 3 --- >> board/qca/ap143/ap143.c | 3 --- >> board/tplink/wdr4300/wdr4300.c | 18 ++++++++++++++---- >> 4 files changed, 28 insertions(+), 10 deletions(-) >> -- - Daniel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot