On Wednesday 26 April 2017 04:41 PM, Adam Ford wrote:
> On Wed, Apr 26, 2017 at 3:07 AM, Lokesh Vutla <lokeshvu...@ti.com> wrote:
>> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
>> ---
>> Changes since v1:
>> - Update base addresses for MMC0 and MMC1
>> board/ti/am335x/board.c | 32 ++++++++++++++++++++++++++++++++
>> 1 file changed, 32 insertions(+)
>>
>> diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
>> index 3e842d3187..6786229680 100644
>> --- a/board/ti/am335x/board.c
>> +++ b/board/ti/am335x/board.c
>> @@ -9,6 +9,7 @@
>> */
>>
>> #include <common.h>
>> +#include <dm.h>
>> #include <errno.h>
>> #include <spl.h>
>> #include <serial.h>
>> @@ -26,6 +27,7 @@
>> #include <asm/emif.h>
>> #include <asm/gpio.h>
>> #include <asm/omap_sec_common.h>
>> +#include <asm/omap_mmc.h>
>> #include <i2c.h>
>> #include <miiphy.h>
>> #include <cpsw.h>
>> @@ -892,3 +894,33 @@ void board_fit_image_post_process(void **p_image,
>> size_t *p_size)
>> secure_boot_verify_image(p_image, p_size);
>> }
>> #endif
>> +
>> +#if !CONFIG_IS_ENABLED(OF_CONTROL)
>> +static const struct omap_hsmmc_plat am335x_mmc0_platdata = {
>> + .base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE,
>> + .cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_4BIT,
>> + .cfg.f_min = 400000,
>> + .cfg.f_max = 52000000,
>> + .cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195,
>> + .cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
>> +};
>
> Do you need to address the offset factor here if you're going to
> rebase from my series? My series removed the offset from struct hsmmc
OMAP_HSMMC1_BASE includes the offset. This is currently being used in
driver as well for non-DM cases.
Thanks and regards,
Lokesh
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
